26
5 Using u: select
TX REPORT:ALWAYS. Transmission report is al-
ways printed after each transmission.
FAILED TX REPORT Transmission report is printed
only after a transmission error
TX REPORT: OFF Printing of the transmission re-
port switched off.
6 Confirm using Y.
7 You can exit with X.
Printing fax journal
Fax Journal
The fax journal is a list of the last ten faxes sent and re-
ceived.
1 Press @ several times until
PRINT OUT RE-
PORT
appears on the display.
2 Confirm using Y.
3 Using u select
ACTIVITY REPORT.
4 Confirm using Y. The fax journal is now printed.
Printing broadcasting report
1 Press @ several times until FAX SET-UP ap-
pears on the display.
2 Confirm using Y.
3 Using / select
VARIOUS SETTINGS.
4 Press Y several times until BROADC. REP.:ON ap-
pears on the display.
5 Using u select whether broadcasting report is to be
automatically printed or not.
6 Confirm using Y.
7 You can exit with X.
Printing reports immediately
You can print reports immediately irrespective of the set-
tings selected for the printing of reports.
1 Press @ several times until
PRINT OUT RE-
PORT
appears on the display.
2 Confirm using Y.
3 Press Y several times until
LAST TX REPORT ap-
pears on the display.
4 Using u select if and which report is to be printed.
5 Confirm using Y. The printing commences.
Printing report for deferred transmission
1 Press @ several times until FAX SET-UP ap-
pears on the display.
2 Confirm using Y.
3 Using / select
VARIOUS SETTINGS.
4 Press Y several times until DELAY LIST: ON ap-
pears on the display.
5 Using u select whether the report for the deferred
transmission is to be automatically printed out or not.
6 Confirm using Y.
7 You can exit with X.
Printing settings
You can print an overview of all device settings.
1 Press @ several times until
FAX SET-UP ap-
pears on the display.
2 Confirm using Y.
3 Using / select
PRINT OUT SET-UP.
4 Confirm using Y.
5 Using u select
PRINT SETTINGS.
6 Confirm using Y. The current settings are printed.
Switching re-transmission on/off
For broadcasting, you can set, if the document should be
automatically removed from the memory if the transmis-
sion failed or not.
1 Press @ several times until
FAX SET-UP ap-
pears on the display.
2 Confirm using Y.
3 Using / select
VARIOUS SETTINGS.
4 Press @ several times until RE-
TRANS.DOC.:OFF
appears on the display.
5 Useu to select from the following settings:
RETRANS.DOC.: ON – After failed transmission,
the fax remains in the memory and can be resent.
RETRANS.DOC.:OFF – The fax is removed from
the memory if the transmission fails.
6 Confirm using Y.
7 You can exit with X.
Starting initial installation
1 Press @ and 1
2 The initial installation commences.
