25
3 Press Y several times until RING COUNT: 02 ap-
pears on the display.
4 Confirm using Y.
5 Select the desired number of rings using u.
6 Confirm using Y.
7 You can exit with X.
Setting the ring duration
For the receiving mode PHONE/FAX you can set how
long the device should ring before the device detects that it
is a telephone call (no fax).
1 Press @ several times until
INSTALLATION
appears on the display.
2 Confirm using Y.
3 Press Y several times until, e.g.
FAX/TEL TIM-
ER:20
appears on the display.
4 Select the desired ring duration in seconds using u.
5 Confirm using Y.
6 You can exit with X.
Setting the timer
For the reception mode PHONE/FAX or TAD/FAX you
can set when the device is to ring before it picks up. This
makes it possible for you to receive faxes silently at night
without getting disturbed.
1 Press @ several times until
INSTALLATION
appears on the display.
2 Confirm using Y.
3 Using / select
ENHANCED FEATUR..
4 Confirm using Y.
5 Press Y several times until, e.g.
SILENT RX: NEV-
ER
appears.
6 Using u select SILENT RX: DAILY.
7 Confirm using Y.
8 Enter the time at which the ring tones are to be
switched off (night mode) e,g, 22 00 for 10 pm.
9 Confirm using Y.
10 Enter the time at which the ring tones are to be
switched on (day mode) e,g, 06 00 for 6 am.
11 Confirm using Y.
Special settings
Silent fax reception
For the reception mode PHONE/FAX or TAD/FAX you
can set whether the device is to ring before it picks up. This
makes it possible for you to receive faxes silently without
getting disturbed.
1 Press @ several times until
INSTALLATION
appears on the display.
2 Confirm using Y.
3 Using / select
ENHANCED FEATUR..
4 Confirm using Y.
5 Press Y several times until, e.g.
SILENT RX: NEV-
ER
appears.
6 Useu to select from the following settings:
SILENT RX: NEVER – Faxes are received with prior
ringing.
SILENT RX:ALWAYS – Faxes are received without
prior ringing.
7 Confirm using Y.
Receiving faxes manually
Select manual reception under reception mode of the fax
switch (
MANUAL). The device will not receive faxes on its
own. After picking up the handset, you can start fax recep-
tion manually, by pressing Y. This setting is useful, when
you want to receive faxes via a modem connected to a com-
puter.
Eavesdropping while connection is
established
You can eavesdrop while the connection is establish.
1 Press @ several times until
INSTALLATION
appears on the display.
2 Confirm using Y.
3 Press Y several times until, e.g.
LINE MONI-
TOR:ON
appears on the display.
4 Using u select whether the speaker should be
switched on while establishing the connection or not .
5 Confirm using Y.
Printing lists
Call log
The call log contains the last 50 dialled numbers.
1 Press @ several times until
PRINT OUT RE-
PORT
appears on the display.
2 Confirm using Y.
3 Using u select
PRINT: ID LIST.
4 Confirm using Y. The caller list will be printed.
Printing transmission report
Printing a Transmission Repo rt
After every transmission, the machine prints out a trans-
mission report. If a transmission error occurs, an error re-
port is printed out. You can switch off printing of the
transmission report.
1 Press @ several times until
FAX SET-UP ap-
pears on the display.
2 Confirm using Y.
3 Using / select
VARIOUS SETTINGS.
4 Press Y several times until FAILED TX REPORT ap-
pears on the display.
