Manual Philips Faxjet 335 (page 28 of 36) (English)

44389

Zoom out

Zoom in

1/36

Using additional telephones (Ea-

sylink)

Easylink

With the Easylink function you can control your device

with additional telephones. To use this function, addition-

al telephones must be set to the tone dialling mode (DT-

MF/MFV tones) (for this purpose see the operating man-

ual of your additional telephone).

Starting Fax Reception

If you pick up at an additional device and hear that you are

receiving a fax (whistling tone or silence), you can start the

fax reception by pressing ** on the additional tele-

phone.

Changing code

Easylink Code

1 Press @ several times until INSTALLATION

appears on the display.

2 Confirm using Y.

3 Press Y several times until

REMOTE START:ON ap-

pears on the display.

4 Confirm using Y.

5 Enter the new code for starting fax reception.

6 Confirm using Y.

7 You can exit with X.

Using an External Answering Machine

For the best operation, the answering machine must be

connected to the B socket of the device.

Answering machine pause duration

You can also change the pause duration for the fax ma-

chine.

1 Press @ several times until

INSTALLATION

appears on the display.

2 Confirm using Y.

3 Press Y several times until

SILENCE LAPSE: 6 ap-

pears on the display.

4 Using u select from the displayed values.

5 Confirm using Y.

6 You can exit with X.

Prerequisites for outgoing message

Answering machine records fax signals

Detecting call signal clock pulse

automatically

Not supported everywhere

(Function is not supported in all countries and

networks)

If several call numbers with different call signal clock puls-

es are assigned to a telephone line by your network opera-

tor, the fax machine can detect these automatically. This

functions only in the

PHONE/FAX or TAD/FAX operat-

ing modes.

1 Press @ several times until

INSTALLATION

appears on the display.

2 Confirm using Y.

3 Using / select

ENHANCED FEATUR..

4 Confirm using Y.

5 Press Y several times until

DISTINC.RING:OFF

appears on the display.

6 Using u select

CHANGE PATTERN.

7 Confirm using Y. AUTODETECT. RING appears on

the display.

8 Call the fax machine with the desired telephone

number (the desired call signal clock pulse), until

RING DETECTED appears on the display of the fax

machine.

9 You can exit with X.

Call signal clock pulse detection

Change the code only if it is absolutely necessary.

The code must begin with * or # .

You can switch this function off, if in step 3 you se-

lect

REMOTE START:OFF, confirm using Yand

exit using X.

Make sure that the pause duration set on the external

answering machine is longer than the one on the fax

machine. Otherwise the answering machine auto-

matically picks up each call including faxes.

The outgoing message must be shorter than ten sec-

onds. Avoid music in your announcement. If the ex-

ternal answering machine has a “conserving func-

tion” (i.e. a function that changes the number of

rings as soon as new messages have been recorded),

switch it off.

If the external answering machine records fax signals,

but your device cannot receive faxes, inspect the con-

nection of the external answering machine

If the call signal clock pulse is not detected by the fax

machine,

RING NOT DETECT.appears on the dis-

play. Press X and repeat the process.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips Faxjet 335 in the language / languages: English as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Faxjet 335

Philips Faxjet 335 User Manual - German - 40 pages

Philips Faxjet 335 User Manual - French - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips Faxjet 335 Manual

Product: