1071

Philips DVDR730 Manual

153
Zoom out
Zoom in
Previous page
1/158
Next page
71
PROBLEM SOLUTION
The wrong TV channel
was decoded
(recorded) after you
programmed a
recording using
ShowView System.
1 Enter the ShowView programming number of the TV channel you want.
2 Confirm with OK .
3 Check the programme number in the 'Prog.' input field.
4 If this does not correspond to the desired TV channel, select the input field and change the
programme number/channel name.
There is picture or
sound interference on
TV reception:
bBefore recording, select the recording mode as described in chapter 'Manual Recording', section 'Selecting the
recording mode (quality)'.
bHave your aerial checked.
bYou will find information on how to change the TV system in 'Manual TV channel search' in 'Installing your
DVD recorder'.
Distorted sound
coming from a
connected hifi
amplifier
bThe DVD recorder is connected to the 'Phono-input' of your amplifier: This socket is provided only for a record
players without a preamplifier. Select a different audio input.
The picture is
distorted or
blackandwhite during
playback
bThe TV system of the disc does not match that of your TV set (PAL/NTSC).
bThe recording can be made in colour only when the TV channels or the connected additional device send a
colour signal. Black-and-white signals containing no color information (colour subcarriers) cannot be recorded.
No sound signal at the
digital output
bCheck whether the sound settings match the selected inputs and connected additional devices. For more
information, see section 'Sound setting' in chapter 'User preferences'.
There could be
difference in the
search speed of a DVD
and DVD+RW
bDepending on the different structure of a DVD and a DVD+RW/+R this can lead to the different search
speeds. This is not a fault in your machine.
A DVD+RW disc
cannot be played on
certain DVD players
bIf a recording is too short, it is possible that a DVD player cannot detect it: Please observe the following
'Minimum recording times':
bSome DVD players cannot play back DVD+RW recordings. You can solve this problem by using a special
function:
1 Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.
2 Hold down the number button 2 on the remote control until the tray closes. The disc is
modified.
3 You can restore the disc to its original condition by pressing 1 .
Warning!
There is a risk that you can no longer play the disc on other DVD players after this procedure.
Therefore, apply this function with particular care.
Other disc errors
(DVD+RW)
bIf it is impossible to play back a disc, you can try and repair it for new recordings using the following function.
This will only prepare the disc for erasing. It will not be erased, however, until the recording has been
completed.
1 Clean the disc
2 Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.
3 Hold down CLEAR on the remote control until the tray closes. The disc is prepared for
erasing.
4 Start recording as with an empty disc.
ENGLISH
Before you call an engineer
… 153 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVDR730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVDR730 in the language / languages: English, German as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVDR730

Philips DVDR730 User Manual - Dutch, French - 160 pages

Philips DVDR730 User Manual - Spanish - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info