Manual Philips DVDR730 (page 151 of 158) (English, German)

1071

151

Zoom out

Zoom in

1/158

If you have any problems using this DVD recorder, the reason may be one of the following. You can

also call the customer service centre in your country.

The telephone numbers can be found on the back of this instruction manual.

You can also visit our web page 'http://www.p4c.philips.com' .

Have the model number (MODEL NO) and the production number (PROD.NO) of your recorder

ready.

The production number (PROD. NO.) is printed on the type plate at the back or on the bottom

PROBLEM SOLUTION

Your recorder does

not respond to any

button being pressed

and the display shows

'PHILIPS', 'IS TV ON?':

bRecorder in initial installation mode: Switch on the TV, switch over to the DVD recorder socket.

Now the menu for language selection should appear. Please read paragraph 'Initial Installation' in the chapter

'Installing your DVD Recorder'.

The device does not

react when you press a

button, although the

remote control works:

b'Key lock' is switched on: All buttons on the front of the set are locked.

Switch off the function:

1 Pull out the mains plug from the wall outlet.

2 Press and hold down h and OPEN/CLOSE J and put back the mains plug into the wall

outlet.

3 As soon as the time or '--:--' appears in the display (ca. 6 - 10 seconds), release h and

OPEN/CLOSE J .

Your DVD recorder

does not respond to

any button being

pressed:

bThere is no power supply: check the power supply

bA programmed recording (Timer) is currently being made: If desired, cancel the programmed recording

(Timer) with STANDBY m .

bThere is a technical problem: disconnect from the mains power supply for 30 seconds, then connect again.

If this doesn't help, you can reset your DVD recorder to the default factory settings.

Resetting the machine

to the default factory

settings

bImportant:

All the information stored (TV channels, time and date, TIMER) will be lost.

1 Disconnect from the mains power supply.

2 Press and hold down the STANDBY-ON m button on the device and reconnect to the

mains power supply.

3 Release the STANDBY-ON m button when the features appears on the display. All the

information stored (TV channels, time and date, TIMER) will be lost.

Please read paragraph 'Initial Installation' in the chapter 'Installing your DVD Recorder'.

Remote control does

not work:

bRemote control not pointed toward the DVD recorder: Point the remote control at the machine. See if the

'o(((' appears on the display briefly each time you press a remote control button. If it does, the Recorder is

receiving information from the remote correctly.

bThere is a technical problem: Take out the batteries, wait for 10 seconds and put them in again.

bBatteries are flat: Change the batteries.

Data transfer from TV

set via 'EASYLINK'

does not work:

bData transfer is controlled via pin nr. 10 of the scart cable. It is possible that the connection to this pin is

interrupted or that the signal is distorted by an additional device connected to the EXT2 AUX-I/O socket.

bRemove any scart switch boxes, mixing consoles, signal amplifiers, ... connected between the DVD recorder

and the TV set. Connect the DVD recorder directly to the TV set.

bRemove any additional devices from the EXT2 AUX-I/O socket.

bTry using another scart cable (all pins wired).

bPlease observe the installation order:

1) Switch on the TV set

2) Connect the DVD recorder to the mains

3) Switch on the DVD recorder using STANDBY m

4) The data transfer should now work.

ENGLISH

Before you call an engineer

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVDR730 in the language / languages: English, German as an attachment in your email.

The manual is 5,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVDR730

Philips DVDR730 User Manual - Dutch, French - 160 pages

Philips DVDR730 User Manual - Spanish - 234 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips DVDR730 Manual

Product: