Manual Philips DVDR730 (page 154 of 158) (English, German)

1071

154

Zoom out

Zoom in

1/158

PROBLEM SOLUTION

Other disc errors

(DVD+R), 'Disc

contains unknown

data' interruption of a

recording (power

outage)

bThis message may appear if you instert a DVD+R that was not finalised or an error occurs during the

recording. DVD+R's that have not been finalised are very sensitive to fingerprints, dust, or dirt. This may

cause problems during recording.

To use the disc again, follow the next steps

1 Make sure that the surface of the disc is clean.

2 Open the disc tray with OPEN/CLOSE J . Insert the defect DVD+R but do not close

the tray.

3 Hold down 5 on the remote control until the tray closes. The disc will be read ('READING'

appears on the display) and the DVD recorder will start the repair process. This may take up

to four times as much time as the recording, in which the error occurred.

4 If the disc is recovered, the index screen will appear.

Please observe the following:

The recovering procedure is successfully only if there was a previous recording on the disc.

Error during recording: The title may be missing.

Error while changing the title/index picture: The original title/index picture may be visible.

Error while finalising: The disc appears not to have been finalised.

The index screen

flickers when a DVD+R

is inserted

bYou can finalise the disc using the following function:

1 Open the disc tray with OPEN/CLOSE J . Insert the defect DVD+R but do not close

the tray.

2 Hold down 4 on the remote control until the tray closes.

'FINALIZE' appears in the display. Finalising begins. This may take up to three minutes.

3 If finalising has been successful, the index screen will appear.

If I switch on a device,

connected to the

EXT2 AUX-I/O socket,

the DVDRecorder

starts a recording.

bThe function 'Automatic Satellite Recording' is switched on.

If the DVD-Recorder is switched off, the symbol 'SAT' appears in the bottom left corner of the display.

If the DVD-Recorder is switched on, instead of the clock, '__:__' appears with a red background in the

'Tuner-Info-Field' (bottom left corner of the screen)

To switch off the function proceed as follows:

1 Press SYSTEM MENU .

2 Select with B the line 'Record settings' (second menu page)

3 Select in line 'Sat record' with D 'Off' instead of 'EXT2'.

4 Confirm the change with OK .

5 End with SYSTEM MENU .

I have forgotten the

PINCode

bTo erase the PIN code (reset to 0000), proceede as follows:

1 First press DISC MENU then SYSTEM MENU .

2 Select the symbol '

' using D , select '

(Disc features)' using B and confirm with C .

3 Confirm the line 'Access control' using C and pree 4 times STOP h on the remote

control. The PIN code is reset to '0000'.

4 End with SYSTEM MENU

Before you call an engineer

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVDR730 in the language / languages: English, German as an attachment in your email.

The manual is 5,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVDR730

Philips DVDR730 User Manual - Dutch, French - 160 pages

Philips DVDR730 User Manual - Spanish - 234 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips DVDR730 Manual

Product: