Manual Philips 70fc566 (page 4 of 56) (English, German, Dutch, French, Italian, Spanish)

780732

Zoom out

Zoom in

1/56

at the beginning of the tape and subsequently

noting the position of the counter at the

beginning of each recording, you wil! then be

able to re-locate these recordings more easily.

® '«' fast winding button

For fast winding to the left.

0 'PLAY' buttons with indicators

For starting playbacl< in the chosen direction.

The indicator of that PLAY button wil! light up.

The tape direction will also be shown in the

display (REVERSE MODE BB).

® TAPE COUNTER'

Indicates how far the tape has travelled.

@ '»' fast winding button

For fast winding to the right.

@ 'STOP' button

For stopping all tape travel functions.

@ 'PAUSE' button with indicator

After this button has been pressed, the tape will

not travel and, therefore, there will be no

recording or playbacl<. The indicator will now

flash.

Press the pause button again to continue

the recording or playback.

@ 'PEAK LEVEL' indicator

Indicates the recording level of both channels.

@ 'REC' recording button with indicator

Press this button to make a recording; the

indicators near the REC and PLAY buttons will

then light up.

@ 'REC MUTE' button

For adding a blank part between recordings.

See 'SILENT RECORDING'.

@ 'REC LEVEL'

For setting the recording level. See 'RECORD-

ING'.

@ 'PHONES' connection socket

For connecting stereo headphones

@ 'L - MIC - R' connection sockets for micro-

phones

For connecting two microphones for stereo

recordings.

@ 'ON/OFF - DOLBY NR - B/C' buttons for the

noise-reduction system

Press the ON/OFF button during recording and

playback if you wish to suppress tape noise.

Press the 'B/C' button if you wish to use the

Dolby C system for even better noise reduction.

The display will show which system is in use.

See 'DOLBY B AND C NR SYSTEM'.

@ 'REVERSE MODE' button

With this button you can choose from three

options: recording/playback of one or both

sides of the cassette and continuous playback

of both sides. See 'REVERSE MODE'.

(g) 'BLANK SKIP' button

Press this button if you wish to skip the blank

parts of a cassette. See 'BLANK SKIP FUNC-

TION'.

@ 'INDEX SCAN' button

With the index scan search system you will hear

the first lOseconds of each recording. See

'INDEX SCAN SYSTEM'.

@ 'QMS' button

The Quick Music Search enables you to select

a certain part on the tape by skipping other

recordings. See 'QUICK MUSIC SEARCH

SYSTEM (QMS)'.

(g) 'TIMER' button

This switch enables you to preset the recorder

in recording or playback position for use with a

timer. See 'RECORDING/PLAYBACK VIA TI-

MER'.

OPERATION

SWITCHING ON/OFF

• Switching on: press the power 'ON/OFF' switch

0; the display will now light up.

Does no indicator light up?

- Then the cassette deck has not been switched on.

- The mains plug is not in the socket.

- The socket is not live.

• Switching off: Press the power 'ON/OFF' switch

0 once again.

REVERSE MODE

The cassette tape can be recorded in either of two

different modes and played back in three different

modes. The display will show which mode is

selected,

see Fig. 7;

Fig.

7a: the tape stops at the end of each side of the

cassette, both during recording and playback.

Fig.

7b: the tape runs through once in forward

direction,

reverses at the end of the cassette and

will play the other side. The tape will stop at the the

end of the second side. This applies for both

recording and playback.

Fig.

7c: During playback in this mode, the automatic

reverse operates on both ends of the cassette.

Both sides of the cassette are continually repeated.

In the recording mode however, the tape will

reverse only at the end of the first side, after which

the second side is recorded. The tape will then stop

at the end of the second side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 70fc566 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19.51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 70fc566 Manual

Product: