749983
208
Zoom out
Zoom in
Previous page
1/211
Next page
Maintenance
Is the bobbin thread evenly wound? Check bobbin winding.
Is a correct needle used? Insert a proper needle correctly as described, see
Changing the Needle, page 34.
Use a needle suitable for selected fabric. See Selecting
Correct Thread/Needle Combination, page 37.
The Machine Does Not Feed or Feeds Irregularly
Did you thread the machine properly? Remove the thread completely and rethread the machine,
see Threading the Upper Thread, page 35.
Has sewing lint collected between the feed teeth? Remove the needle plate and clean the feed teeth with
the brush.
Is the free motion setting on? Turn off free motion setting in sewing mode.
Are the feed teeth set to down? Make sure the feed teeth are not set to down in the
settings menu.
Is the correct presser foot used? Attach correct presser foot.
Thread Loops are Forming on the Underside of the Embroidery Design
Has the embroidery built up too much to move freely
under the presser foot?
Attach the Dynamic Spring Foot 6D.
If using the 6A Embroidery/Sensormatic Free Motion
Foot, increase the embroidery pivot height in settings
menu in small increments until the problem is solved.
The Embroidery Design is Distorted
Is the fabric hooped properly? The fabric must be tightly hooped.
For larger hoops, use hoop clips.
Is the inner embroidery hoop properly inserted into the
outer embroidery hoop?
Hoop the fabric in such a way that the inner hoop
exactly matches the outer hoop.
Is the area around the embroidery arm and hoop free? Clear area around the embroidery unit.
Is the hoop attached properly? Make sure the hoop connector is inserted all the way
into the hoop attachment on the embroidery arm.
The Embroidery Design has Puckered
Did you stabilize your fabric sufficiently? Ensure you use the proper stabilizer for your technique
or fabric type.
The Machine will not Embroider
Is the embroidery unit attached? Make sure that the embroidery unit is properly attached
into the socket.
Is the wrong hoop attached? Slide on the correct hoop.
Service
Have your sewing machine serviced regularly by your local authorized retailer!
If you have followed this troubleshooting information
and still have problems, contact your retailer. It may be
helpful to bring the fabric, thread and stabilizer you are
208
208


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Creative Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Creative Icon in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Creative Icon

Pfaff Creative Icon User Manual - German - 234 pages

Pfaff Creative Icon User Manual - Dutch - 230 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info