749983
206
Zoom out
Zoom in
Previous page
1/211
Next page
Maintenance
The Automatic Needle Threader Does Not Work Properly
The needle eye is too small for the thread Use a larger needle size or lighter weight thread. See
Selecting Correct Thread/Needle Combination, page 37
Are you using a specialty thread such as an “invisible”
or other stretchy thread, metallic or flat metallic thread
or heavy weight thread?
Specialty threads may not be caught correctly by the
hook on the automatic needle threader. If this happens,
the needle will not be threaded. Try using the automatic
needle threader again or thread the needle manually.
Pop-up message: The automatic needle threader is not in
its home position. Touch OK to calibrate.
The needle threader has shifted from its home position,
possibly due to something snagging on it during sewing
or embroidery. Touch OK to calibrate the needle
threader and continue sewing or embroidering.
Pop-up message: The calibration of the automatic needle
threader has failed. Touch OK to calibrate again. If the
automatic needle threader still does not calibrate
correctly, please contact your local authorized service
center.
Shown if the machine fails to calibrate the needle
threader when turning on the machine. Remove
anything that may be blocking the needle threader and
touch OK.
Pop-up message: The automatic needle threader seems
to be blocked and cannot return to its home position.
Touch OK to move the automatic needle threader to
position for manual cleaning.
If using thread that is too thick for the needle, the
automatic needle threader may not be able to pull the
thread through the needle eye. Touch OK to go to
manual cleaning. A new pop-up message with further
instructions will appear.
If you cannot identify the problem or are unable to
remove the thread, touch cancel.
Pop-up message: Gently remove any thread that is stuck
in the automatic needle threader or needle eye. Touch
OK to return the automatic needle threader to its home
position.
If using thread that is too thick for the needle, the
automatic needle threader may not be able to pull the
thread through the needle eye. Remove the thread
carefully so as not to damage the small hook that runs
through the needle eye. Once the thread is removed,
touch OK.
Pop-up message: The automatic needle threader is not in
its home position. Further sewing is disabled to prevent
damage to the machine. After closing this pop-up, touch
the automatic needle threader button on your machine
to try threading again or contact your local authorized
service center.
Contact your authorized PFAFF® retailer for service.
Pop-up message: The automatic needle threader cannot
return to its home position. Further sewing is disabled to
prevent damage to the machine. Please contact your
local authorized service center.
Contact your authorized PFAFF® retailer for service.
The Machine Skips Stitches
Did you insert the needle properly? Insert needle correctly as described, see Changing the
Needle, page 34.
Did you insert a wrong needle? Use needle system 130/705 H.
Use a needle suitable for selected fabric and thread. See
Selecting Correct Thread/Needle Combination, page 37.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Remove the thread completely and rethread the machine,
see Threading the Upper Thread, page 35.
Is the correct presser foot used? Attach correct presser foot.
206
206


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Creative Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Creative Icon in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Creative Icon

Pfaff Creative Icon User Manual - German - 234 pages

Pfaff Creative Icon User Manual - Dutch - 230 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info