749983
207
Zoom out
Zoom in
Previous page
1/211
Next page
Maintenance
Is the needle too small for the thread? Change the needle.
Is the fabric moving up and down with the needle when
free motion sewing or embroidering?
Attach the Dynamic Spring Foot 6D.
If using the 6A Embroidery/Sensormatic Free Motion
Foot, decrease the embroidery pivot height in settings
menu in small increments until the problem is solved.
Needle Thread Breaks
Did you insert the needle properly? Insert needle correctly, see Changing the Needle, page
34.
Did you insert a wrong needle? Use needle system 130/705 H.
Use a needle suitable for selected fabric and thread. See
Selecting Correct Thread/Needle Combination, page 37.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Remove the thread completely and rethread the machine,
see Threading the Upper Thread, page 35.
Does the thread slide down and get caught under the
thread spool?
Place the large spool holder with the flat side up under
the spool on the spool pin, or for larger spools use a
thread net over the spool. See Threading Tips and Hints,
page 39.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Are you using poor thread with slubs or thread which
has become dry?
Change to a new high quality thread purchased from an
authorized PFAFF® retailer.
If using a spool cap on top of the spool, is it too small so
the thread snags at the top of the spool?
Attach a spool cap slightly larger than the actual thread
spool.
Is the best spool pin position used? Try a different spool pin position (vertical or horizontal).
Is the needle plate hole damaged? Change the needle plate.
Is the thread tension too high for selected thread? Lower the thread tension in small increments until
problem is solved.
Bobbin Thread Breaks
Is the correct bobbin used? Use only bobbins especially designed for the creative
icon™ machine.
Did you insert the bobbin properly? Check the bobbin thread.
Is the needle plate hole damaged? Change the needle plate.
Is the bobbin area full of lint? Clean lint from bobbin area and use only the original
bobbins approved for this model.
Is the bobbin wound correctly? Wind a new bobbin.
The Seam has Uneven Stitches
Is the thread tension correct? Check needle thread tension.
Remove the thread completely and rethread the machine,
see Threading the Upper Thread, page 35.
Is the thread you are using thick or slubbed? Change the thread.
207
207


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Creative Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Creative Icon in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Creative Icon

Pfaff Creative Icon User Manual - German - 234 pages

Pfaff Creative Icon User Manual - Dutch - 230 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info