87
installation guide
General
This appliance meets all relevant CE guidelines.
The data plate on the underside of the appliance indicates the total nominal
load, the required voltage and the frequency.
Safety
This appliance should only be connected up by a registered electrical installer!
The electrical connection must comply with national and local regulations.
The appliance should always be earthed.
Damage caused by incorrect connection, incorrect use or incorrect building in
is not covered by the guarantee.
For correct operation of the appliance it is important that:
■ the power cable hangs freely and is not struck by a drawer;
■ the worktop is level.
The walls and the worktop around the appliance must be made of heat-
resistant (>85°C) material. Even if the appliance itself does not get hot, the heat
from a hot frying pan, for instance, could cause discolouring or damage to the
wall or worktop.
86
environmental aspects
Disposal of packaging / appliance
In the manufacturing of this appliance use has been made of durable materials.
At the end of its lifecycle this appliance must be disposed of in a responsible
manner. The authorities can advise you on this.
The appliance packaging is recyclable. The following may have been used:
■ cardboard;
■ polythene film (PE);
■ CFC-free polystyrene (PS hard foam).
Dispose of these materials responsibly and in accordance with government
regulations.
