706364

Parkside PZKS 1500 B2 - IAN 295934 Manual

100
Zoom out
Zoom in
Previous page
1/110
Next page
95GB / IE / NI
• The laser outlet opening is located at the
front of the laser's visible end; see Fig.
21 No. (13).
• Do not look directly into the laser beam
with unprotected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards
reflecting surfaces and persons or
animals. Even a laser beam with a low
output can cause damage to the eyes.
• Caution- methods other than those
specified here can result in dangerous
radiation exposure.
• Never open the laser module. unexpected
exposure to the beam can occur.
• The laser may not be replaced with a
different type of laser.
• Repairs of the laser may only be carried
out by the laser manufacturer or an
authorised representative.
6. Technical data
Rated voltage 220 - 240 V ~ 50Hz
Power 1200 W
Operating mode S6 25% 1500 W
Idle speed n
0
5000 min
-1
Carbide saw blade
Ø210 mm x 2,6 mm x Ø30 mm
Number of teeth 24
Mitre sawing range 0°- 45° (to left and right)
Bevel sawing range 0°- 45° to the left
Maximum cutting capability
：
Mitre/Bevel Angle
Maximum cross-section
(length and depth) of the
cut / the workpiece (mm)
Horizontal Vertical
0° 0° 340 x 62 mm
45° 0° 240 x 62 mm
0° 45° 340 x 34 mm
45° 45° 240 x 34 mm
Protection class II/
Weight approx.13 kg
Laser class 2
Wavelength of laser 650 nm
Laser output
≤
1 mW
* S6, continuous operation periodic duty.
Identical duty cycles with a period at
load followed by a period at no load.
Running time 2 minutes; duty cycle is
25% of the running time.
Minimum workpiece sizes (all workpieces
that can be clamped from the saw blade
with the supplied material clamp): 140 x
50 mm (length x width). Cutting depth,
max. (0°/0°): 62 mm
Make sure that the workpiece is always
secured with the clamping device.
Noise
Total noise values determined in accordance
with EN 61029.
sound pressure level L
pA
98.8 dB(A)
uncertainty K
pA
3 dB
sound power level L
WA
111.8 dB(A)
uncertainty K
WA
3 dB
Wear hearing protection.
The effects of noise can cause a loss of
hearing.
Vibration levels
Total vibration value at the handle
≤
2.5 m/s²
Measurement uncertainty: 1.5 m/s²
The measurements were performed in
accordance with EN 61029-1 and
EN 61029-2-9.
The specified vibration emission level was
measured on the basis of a standardised
test procedure and can be used to compare
power tools with one another.
The specified vibration emission level may
also be used to initially assess the
exposure.
Attention!
While actually using the power tool, the
vibration emission level may differ from the
level specified depending on how the power
tool is used.
Technical data
… 100 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PZKS 1500 B2 - IAN 295934 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 295934 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info