706364

Parkside PZKS 1500 B2 - IAN 295934 Manual

98
Zoom out
Zoom in
Previous page
1/110
Next page
93GB / IE / NI
- This electric tool complies with the
applicable safety rules. Repairs should
only be carried out by qualified persons
using original spare parts, otherwise this
may result in considerable danger to the
user.
ADDITIONAL SAFETY
INSTRUCTIONS
1 Safety precautions
-
WARNING!
Do not use saw blades
which are damaged or deformed.
- Replace the table insert when worn.
- Only use saw blades recommended
by the manufacturer which conform to
EN 847-1.
- Do not use saw blades made of high
speed steel (HSS steel).
- Wear suitable personal protective
equipment when necessary, this could
include:
- Hearing protection to reduce the risk of
induced hearing loss,
- Eye protection. Sparks generated during
work or splinters, chippings and dust
coming from the device can lead to loss
of eyesight.
- Respiratory protection to reduce the risk
of inhalation of harmful dust,
- Gloves for handling saw blades and
rough materials. Carry saw blades in a
holder whenever practical.
- Always connect the saw to a dust
collecting device.
The emission of dust is influenced, among
other things, by the type of material to
be processed, the significance of local
separation (collection or source), and the
correct setting of the hood/guide plates/
guides.
2 Maintenance and repair
- Pull out the mains plug for any adjustment
or repair tasks.
- The generation of noise is influenced
by various factors, including the
characteristics of saw blades, condition
of saw blade and electric tool. Use saw
blades which were designed for reduced
noise development, insofar as possible.
Maintain the electric tool and tool
attachments regularly and if necessary,
initiate repairs in order to reduce noise.
- Report faults on the electric tool,
protective devices or the tool attachment
to the person responsible for safety as
soon as they are discovered.
3 Safe Operation
- Make sure that a suitable saw blade for
the material to be cut is selected.
- Never use the machine to cut other
materials as specified.
- To transport the machine follow the
procedure of point 9.
When transporting the electric tool, only
use the transport devices. Never use
the protective devices for handling or
transport.
- Operate the machine only if the
protective devices are functional, in good
condition and in the correct position.
- The floor around the machine must be
level, clean and free of loose particles,
such as chips and cutting residues.
- Only use saw blades for which the
maximum permissible speed is not lower
than the maximum spindle speed of the
machine and which are suitable for the
material to be cut.
- Be sure to only use spacers and spindle
rings specified by the manufacturer as
suitable for the intended purpose.
- Attention! Do not replace the laser by
a different type.
Safety information
… 98 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PZKS 1500 B2 - IAN 295934 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 295934 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info