Manual Parkside PWSAP 20-L i A1 - IAN 289752 (page 30 of 114) (English, German, Dutch, French, Portuguese, Spanish)

722852

Zoom out

Zoom in

1/114

1. Adjust the guard

such that any sparks or

detached parts cannot hit either the user or

any bystanders.

2. The guard

must also be positioned such

that the sparks cannot ignite combustible

parts, including those in the surroundings.

3. Turn the guard

to the required position so

the clamp should match the notches on the

guard

Q Attaching / removing the

accessory

WARNING!

u Always remove the battery pack from the

product before changing the accessory in

order to avoid switching it on accidentally.

u Always use the correct accessories according

to the intended use! Observe the technical

requirements of this product (see section

Technical data) when purchasing and using

accessories!

u Accessories can be sharp and become hot

during use! Handle them carefully! Wear

safety gloves when handling accessories in

order to avoid injuries like burns and cuts!

u Never press the spindle lock whilst the

spindle is rotating!

u The arrow on the accessory must correspond

to the arrow showing the direction of rotation

(running direction shown on the product).

u Ensure that the accessory is suitable for the

rotational speed of the product.

u Do not use any saw blades.

CAUTION! RISK OF INJURY!

u Only use accessory recommended by the

manufacturer. Using other attachment tools

and other accessories can represent a risk of

injury for you.

u Only use accessory, which bear information

about the manufacturer, type of binding,

dimension and permitted number of

revolutions.

u Only use grinding discs where the printed

rotational speed is at least as high as what

has been speciﬁed on the product marking.

u Do not use any broken, cracked, or otherwise

damaged accessories.

u Only use ﬂawless grinding discs (ringing

test: when you strike the disc with a plastic

hammer, it results in a clear sound).

u Ensure that the accessory dimensions match

those of the product.

u Never re-drill a locating hole which is too

small to make it larger.

u Never use separate bushings or adapters in

order to make discs with a hole that is too

large ﬁt the product.

u Never operate the product without protective

equipment.

u Support plates or workpieces to reduce the

risk of kickback from a jammed disc. Large

workpieces may bend under their own

weight. The workpiece must be supported on

both sides of the disc, near the disc as well

as at the edge.

u Always reassemble the product completely

after replacing accessories.

1. Press and hold the spindle lock button

2. Release the locking ﬂange

, with the chuck

key

3. Mount the desired accessory onto the

backing ﬂange

. Label should always face

the product.

4. Mount the locking ﬂange

on the spindle.

5. Press and hold the spindle lock button

and tighten the locking ﬂange

tight again

using the chuck key

32 GB / IE

289752_CB8_DE_EN_FR_NL_CS_ES_PT_170930.indb 32 9/30/17 8:11 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSAP 20-L i A1 - IAN 289752 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSAP 20-L i A1 - IAN 289752

Parkside PWSAP 20-L i A1 - IAN 289752 Additional guide - English, German, Dutch, French, Portuguese, Spanish - 73 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSAP 20-L i A1 - IAN 289752 Manual

Product: