722852
29
Zoom out
Zoom in
Previous page
1/114
Next page
Removing the battery pack:
1. Press the release button
2
and remove the
battery pack
4
.
Q Charging the battery pack
NOTE
u The battery pack
4
comes partly charged.
Charge the battery pack
4
prior to first use,
ideally at least 90 minutes.
u Always pull out the plug of the charger
13
from the mains before removing or connecting
the battery pack
4
to the charger.
u Never charge the battery pack
4
when
the ambient temperature is below 10 °C or
above 40 °C.
u Rest the charger
13
for at least 15 minutes
between successive charging sessions.
u If no battery pack
4
is inserted into the
charger
13
and the charger is connected to
mains, the charging status LED
15
lights up
green.
1. Connect the battery pack
4
to the battery
charger
13
.
2. Insert the mains plug into the socket. The
charging status LED
14
lights up red.
Once the battery pack
4
is completely
charged, the green charging status LED
15
indicates that the charging process is complete.
3. Disconnect the charger
13
from the mains
and remove the battery pack
4
from the
charger.
4. Attach the battery pack
4
back to the product.
Charging status LEDs
Green LED lights up
without battery pack
Charger ready
Green LED lights up
with battery pack
Battery pack fully charged
Red LED lights up
with battery pack
Battery pack charging
Red LED flashes with
battery pack
Battery pack defect
Green LED flashes
with battery pack
Battery pack too cold or
warm
Q Checking the battery level
o Press the battery level button
1
to check the
charging level of the battery pack
4
. The
charging level will be shown on the battery
level indication light
3
.
3 Red LEDs light up maximum charging level
2 Red LEDs light up medium charging level
1 Red LEDs lights up low charging level
o Charge the battery pack
4
before operation
when it is at medium or low charging level.
Q Attaching / removing the
auxiliary handle
NOTE
u The product must only be operated with the
auxiliary handle mounted.
1. Screw the auxiliary handle
6
, depending
on the type of work, to the left, right or top of
the product using the threads for the auxiliary
handle
11
.
Q Adjusting the guard
WARNING!
u Always remove the battery pack from the
product before adjusting the guard in order
to avoid switching it on accidentally.
CAUTION! RISK OF INJURY!
u Wear protective gloves. Be careful when
gripping and turning the guard due to
potential finger squeezing hazard between
the guard and disc.
NOTE
u The product must only be operated with the
guard mounted.
31 GB / IE
289752_CB8_DE_EN_FR_NL_CS_ES_PT_170930.indb 31 9/30/17 8:11 AM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWSAP 20-L i A1 - IAN 289752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSAP 20-L i A1 - IAN 289752 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSAP 20-L i A1 - IAN 289752

Parkside PWSAP 20-L i A1 - IAN 289752 Additional guide - English, German, Dutch, French, Portuguese, Spanish - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info