706354

Parkside PTS 500 C3 - IAN 286507 Manual

32
Zoom out
Zoom in
Previous page
1/132
Next page
1. NEVER direct the laser beam at people or
animals.
2. NEVER look directly into the laser beam. The
laser beam can cause serious eye damage.
3. Do NOT direct the laser beam at strongly
reflective material. Reflected laser beams are
also dangerous.
4. Any adjustment intended to increase the
intensity of the laser beam is forbidden. There
is a risk of personal injury!
5. No liability will be accepted for damage
resulting from manipulation of the laser
equipment or from disregarding these safety
instructions.
6. Caution if other than the controls or
adjustments specified here or other
procedures are carried out, this may lead to
dangerous exposure to radiation.
NOTE
u If the product is not used according to the
manufacturer’s operating instructions, the
protection provided may be impaired.
Q Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment.
Take the following points into account to minimise
the vibration and noise exposure risks:
¢ Only use the product as intended by its
design and these instructions.
¢ Ensure that the product is in good condition
and well maintained.
¢ Use correct cutting attachments for the
product and ensure they are in good
condition.
¢ Keep tight grip on the handles/grip surface.
¢ Maintain this product in accordance with
these instructions and keep it well lubricated
(where appropriate).
¢ Plan your work schedule to spread any high
vibration tool use across a longer period of
time.
Q Behaviour in emergency
situations
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety warnings and follow them to the letter. This
will help to prevent risks and hazards.
¢ Always be alert when using this product, so
that you can recognise and handle risks early.
Fast intervention can prevent serious injury
and damage to property.
¢ Switch the product off and disconnect it from
the mains if there are malfunctions. Have the
product checked by a qualified professional
and repaired, if necessary, before you
operate it again.
Q Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
¢ Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
¢ Injuries and damage to property due to
broken cutting attachments or the sudden
impact of hidden objects during use.
¢ Danger of injury and property damage
caused by flying objects.
WARNING!
u This product produces an electromagnetic
field during operation! This field may under
some circumstances interfere with active or
passive medical implants! To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
Q Battery safety warnings
¢ Keep batteries out of reach of children at all
times.
¢ Seek immediate medical advice if batteries
have been swallowed.
¢ Handle leaking batteries with proper
protection and dispose them of accordingly.
Prevent battery acid from coming into contact
with skin and eyes. If you do get battery acid
in your eyes or mouth, flush them thoroughly
with lots of water and seek medical advice
immediately. If battery acid comes into
contact with your skin, wash the affected area
with lots of water and soap.
¢ Clean the contacts on batteries and the
product prior to inserting.
¢ Do not use old and new batteries, batteries
of different types or different manufacturers
together. Always replace all batteries of a set
at the same time.
34 GB / IE
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTS 500 C3 - IAN 286507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTS 500 C3 - IAN 286507 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info