706354

Parkside PTS 500 C3 - IAN 286507 Manual

29
Zoom out
Zoom in
Previous page
1/132
Next page
Further safety instructions for all saws -
Guard function
1. Check guard for proper closing
before each use. Do not operate the
saw if guard does not move freely
and enclose the blade instantly.
Never clamp or tie the guard so
that the blade is exposed. If saw is
accidentally dropped, guard may be bent.
Check to make sure that guard moves freely
and does not touch the blade or any other
part, in all angles and depths of cut.
2. Check the operation and condition of
the guard return spring. If the guard
and the spring are not operating
properly, they must be serviced
before use. Guard may operate sluggishly
due to damaged parts, gummy deposits, or a
build-up of debris.
3. Assure that the base plate of the
saw will not shift while performing
the “plunge cut” when the blade
bevel setting is not at 90°. Blade
shifting sideways will cause binding and likely
kick back.
4. Always observe that the guard is
covering the blade before placing
saw down on bench or floor. An
unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is in
its path. Be aware of the time it takes for the
blade to stop after switch is released.
Additional circular saw safety warnings
¢ If the supply cord is damaged, it must be
re-placed by a special cord or assembly
available from the manufacturer or its service
agent.
¢ Do not use any grinding discs.
¢ Use only blades with diameters
corresponding to the label on the product.
¢ When cutting wood or other materials which
may create dusts that are hazardous to
health, always connect a suitable, certified
vacuum extractor device.
¢ Wear a dust mask when cutting wood.
¢ Use only the recommended blades.
¢ Always wear ear protectors.
¢ Do not allow the teeth of the blade to
overheat.
¢ When cutting plastic, avoid melting the
plastic.
Saw blade safety warnings
¢ Only use saw blades if you have knowledge
of how to use and handle them.
¢ Pay attention to the maximum rotational
speed. The maximum rotational speed marked
on the saw blade shall not be exceeded.
¢ Do not use working saw blades which are
cracked. Scrap of saw blades which bodies
are cracked. Repairing is not permitted.
¢ Clamping surfaces shall be cleaned to
remove dirt, grease, oil and water.
¢ Do not use reducing washers / rings to “make
up” bore sizes on saw blades.
¢ Ensure that flanges for securing the accessory
have the same diameter and at least 1/3 of
the cutting diameter.
¢ Ensure flanges are parallel to each other.
¢ Handle saw blades with care. Store them in
the original packaging or in special boxes.
Wear gloves for handling and to reduce
injuries.
¢ Ensure all guards are correctly fixed before
using saw blades.
¢ Before use, make sure that the saw blade
complies with the technical requirements of
the product and is correctly fixed.
¢ A longer period of use may lead to
overheating of the blade tips. Therefore take
breaks of approx. 15 minutes on a regular
basis to let the blade tips cool down.
Safety instructions for abrasive
cutting-off operations - Cut-off machine
safety warnings
1. The guard provided with the tool
must be securely attached to the
power tool and positioned for
maximum safety, so the least
amount of wheel is exposed towards
the operator. Position yourself and
bystanders away from the plane of
the rotating wheel. The guard helps to
protect operator from broken wheel fragments
and accidental contact with wheel.
2. Use only diamond cut-off wheels
for your power tool. Just because an
accessory can be attached to your power
tool, it does not assure safe operation.
3. The rated speed of the accessory
must be at least equal to the
maximum speed marked on the
power tool. Accessories running faster than
their rated speed can break and fly apart.
31 GB / IE
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTS 500 C3 - IAN 286507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTS 500 C3 - IAN 286507 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info