763675

Parkside PTPS 1100 A1 - IAN 344876 Manual

23
Zoom out
Zoom in
Previous page
1/102
Next page
23
GB IE
Or use a screw connection on the an-
gle adapter with quick-connect connec-
tor (9), or on the reducer (10).
Outlet with a 1½”-internal thread on
the pump for connection of the quick-
connect adapter (8) or for direct con-
nection of a hose with a 1½”-external
thread;
Outlet with 1½“-external thread at the
bracket adapter (9) for connection of
the reducer (10) or a 1½“-screw con-
nection;
Outlet on reducer (10) for connection
of a 1¼”- or 1½”-hose as a compres-
sion joint (xing with a hose clamp);
Outlet with 1“-external thread at the re-
ducer (10) for connection of a 1“-screw
connection;
Outlet with 1“-thread at the reducer
(10) for connection of a 1“-hose as
clamp connection (xing with a hose
clamp).
Note that the particle size may be
max. 18 mm if the reducer
(Outlet with 1“) is used, otherwise
the reducer and hose can become
blocked.
Adjustmentoftheoat
switch
The oat switch (3) is adjusted so that it
can be started up immediately.
In the case of stationary installation,
check regularly (no less then once
every three months) that the oat
switch (3) is working.
The switch-on/switch-off point of the oat
switch (3) can be set in multiple incre-
ments:
1. Press the lever (13) on the oat switch
height adjustment (2) together and
move it to the desired position.
2. Release the lever (13). The oat switch
height adjustment (2) locks into place.
Check the oat switch (3).
- It must be positioned so that it
can lift and lower freely. The
switching point heights “On”
and “Off” must be easy to
reach.
Check this by placing the pump
into a vessel lled with water
and lift the oat switch (3) care-
fully by hand and then lower it
again. In this case, you can see
whether the pump switches on
and off.
- Also ensure that the separation
distance between the oat switch
(3) head and the oat switch
height adjustment (2) is not too
small. In the case of a separa-
tion distance which is too small,
trouble-free functioning cannot
be guaranteed.
- During the adjustment of the oat
switch (3), ensure that the oat
switch does not contact the oor
before the pump switches off.
The pump run dry if too long a oat
switch cable ( 12) is chosen,
particularly if the oat switch height
adjustment (2) is not installed (see
„Initial Operation“).
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTPS 1100 A1 - IAN 344876 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTPS 1100 A1 - IAN 344876 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info