Manual Parkside PTPS 1100 A1 - IAN 344876 (page 21 of 102) (English, German, Dutch, French, Polish)

763675

Zoom out

Zoom in

1/102

GB IE

detect automatic switching off

or dry running of the pumps

in time. Regularly check the

function of the oat switch (see

chapter “Initial Operation“).

Non-observance will invali-

date all guarantee and liability

claims.

• Please note that the pump is

not suitable for continuous op-

eration (e.g. for watercourses

in garden ponds). Check the

equipment regularly for correct

functioning.

• Note that the lubricants used in

the equipment may cause dam-

age or contamination if they

escape. Do not use the pump in

garden ponds with sh stocks or

valuable plants.

• Do not carry or x the equip-

ment by the cable or pressure

line.

• Protect the equipment from frost

and from running dry.

• Use only original accessories

and do not carry out conversion

work on the equipment.

• Please read the notes in the op-

erating instructions on the topic

of “Cleaning/Maintenance/

Storage”. Any measures above

and beyond these, particularly

opening the equipment, are to

be carried out by an electrician.

In the case of repairs, always

contact our service centre.

Electrical safety:

Caution: to avoid accidents

and injuries from electric

shocks:

• After erection, the mains plug

must be freely accessible when

the equipment is in operation.

• Before operating your new

pump, have a specialist check:

- The earthing, the protec-

tive multiple earthing; the

residual current circuit break-

ing must be compliant with

the safety regulations of the

energy supply company and

function without fault,

- The protection of the electri-

cal plug connections from the

wet.

- If there is a risk of ooding,

x the plug connections in an

area that is safe from ood-

ing.

• Ensure that the mains voltage

matches the specications on

the rating plate.

• The electrical installation shall

be according to national wiring

rules.

• Before each use, check the

equipment, cable and plug for

damage. Defective cables are

not to be repaired, but rather

replaced by new ones. Have

damage on your equipment re-

paired by an authorised special-

ist.

• If the power cable for this equip-

ment is damaged, it must be

replaced by the manufacturer,

a customer service agent of the

same or a similarly qualied

person in order to prevent haz-

ards.

• Do not pull the plug from the

socket by the cable. Protect the

cable from heat, oil and sharp

edges.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTPS 1100 A1 - IAN 344876 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PTPS 1100 A1 - IAN 344876 Manual

Product: