Manual Parkside PTPS 1100 A1 - IAN 344876 (page 22 of 102) (English, German, Dutch, French, Polish)

763675

Zoom out

Zoom in

1/102

GB IE

• Do not carry or x the equip-

ment by the cable.

• Use only extension cables that

are protected from spray water

and designed for outdoor use.

Always fully unroll a cable drum

before use. Check the cable for

damage.

• Disconnect the mains plug from

the socket before all work on

the equipment, in case of leaks

in the water system, during

work breaks, and when not in

use.

• Extension cables must not have

a cross-section that is smaller

than those of rubber hoses with

the designation H07RN8-F. The

cable length must total 10 m.

The wire cross section of the

extension cable must be at least

2.5 mm2.

• Perform the electrical installa-

tion in accordance with national

regulations.

Initial Operation

Positioning/Hanging

• The dimensions of the pump shaft must

be not less than 40 x 40 x 50 cm, in

order that the oat switch ( 3) can

move freely.

• The device can be suspended from the

handle ( 1) or placed on the bottom

of the shaft.

The pump can be suspended and/or

removed using the nylon cord ( 11)

provided.

To ensure it is suspended securely,

thread the cord ( 11) through the

handle ( 1)

as depicted in Figure .

Never suspend the pump by the hose.

Ensure that the equipment is

not hung up or held by the

mains cable. There is a risk

of electric shock from dam-

aged mains cables.

Note that, over time, dirt and sand

may collect on the bottom of the

shaft, which could damage the

pump.

We recommend standing the pump

on a brick.

If the water level is too low, the silt in

the shaft can quickly dry out and im-

pede the pump when warming up.

Mains Connection

The pump you have purchases is already

tted with an earthed plug. The equipment

is designed for connection to an earthed

wall socket with a RCD (Residual Current

Device) at 230 V~ 50Hz.

Connecting the Pressure

Line

The pump is installed

- Either with a xed pipeline

- Or with a exible hose line.

1. Screw the quick-connect adapter (8)

onto the pump outlet (6).

2. Press the red release button on the

quick-connect adapter (8) and slide

the angle adapter with quick-connect

connector (9) into the quick-connect

adapter (9). Let go of the red release

button again.

3. Fit the hose over the reducer (10) and

secure it with a hose clamp.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTPS 1100 A1 - IAN 344876 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PTPS 1100 A1 - IAN 344876 Manual

Product: