Manual Parkside PTK 2000 D3 - IAN 298657 (page 31 of 108) (English, German, Dutch, Portuguese, Spanish)

691162

Zoom out

Zoom in

1/108

GB IE

1. Blade dissolves after swit-

ching off the engine

To slightly tightened fastening nut Tighten the right hand thread nut

2. Engine will not start a) Failure mains fuse a) Check mains fuse

b) Defective extension cable b) Replace extension cord

c) Connections on motor or switch not in order c) Repair by electrical specialist

d) Motor or switch faulty d) Repair by electrical specialist

3. Motor wrong direction of

rotation

a) Capacitor faulty a) Repair by electrical specialist

b) Wrong connection b) Exchange polarity of outlet by an



4. Motor will not work, the

fuse is activ

a) Cross section of the extension cable does not



a) see „Electrical connection“

b) Overload by a blunt saw blade b) Change saw blade

5. Fire marks on the cutting

surface

a) blunt saw blade a) Sharpen or change saw blade

b) wrong saw blade b) Change saw blade

Problem Possible cause Fault correction

Trouble shooting

Spare parts/Accessories

Spare parts and accessories can be obtained at

www.grizzly-service.eu

If you do not have internet access, please contact the Service Centre via telephone (see “Service-Center” page 32). Please have the

order number mentioned below ready.

(6) Parallel stop, complete ....................... Order-No. 9110353 0

(40) Transverse stop. .............................. Order-No. 91103531

(2) Blade guard, complete ....................... Order-No. 91104563

(17) Table length extender ....................... Order-No. 9110 4557

(5) Table insert ....................................... Order-No. 91104 566

(7) Table width extender (right) ................ Order-No. 91104 561

(7) Table width extender (left) ................... Order-No. 9110 4 562

(35) Laser .............................................. Order-No. 91104558

(3) Riving knife ....................................... Order-No. 9110 4559

(11) Handwheel, complete ....................... Order-No. 91104560

(19) Push stick ........................................ Order-No. 91104950

(14) On/off switch, complete ................... Order-No. 91104952

(24) Stand brackets (both sides) ............... Order-No. 91103542

(23) Rubber feet ..................................... Order-No. 9110 4951

(4) Saw blade 24 Teeth .......................... Order-No. 13800400

(4) Saw blade 48 Teeth ........................... Order-No. 13800401

(15) Collection bag ................................. Order-No. 91104 556

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date

of purchase.

In case of defects, you have statutory rights against the seller of

the product. These statutory rights are not restricted by our guar-

antee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please

retain the original receipt. This document is required as proof of

purchase.

If a material or manufacturing defect occurs within three years of

the date of purchase of this product, we will repair or replace –

at our choice – the product for you free of charge. This guarantee

requires the defective equipment and proof of purchase to be pre-

sented within the three-year period with a brief written descrip-

tion of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either

the repaired product or a new product. No new guarantee peri-

od begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service.

This also applies for replaced or repaired parts. Any damages

and defects already present at the time of purchase must be re-

ported immediately after unpacking. Repairs arising after expiry

of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with

strict quality guidelines and conscientiously checked prior to

delivery.

Motor cut out is there a restart button on the motor Submitted on 7-4-2023 at 16:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTK 2000 D3 - IAN 298657 in the language / languages: English, German, Dutch, Portuguese, Spanish as an attachment in your email.

The manual is 2,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PTK 2000 D3 - IAN 298657 Manual

Product: