Manual Parkside PSBS 240 C2 - IAN 321203 (page 29 of 124) (English, German, Dutch, French, Polish)

773450

Zoom out

Zoom in

1/124

IEGB

• Always reassemble the device

completely after replacing the

grinding disc.

Switch the device off and remove

the mains plug.

Allow the device to cool down.

Wear protective gloves when

changing the grinding discs in or-

der to avoid cutting damages.

1. Remove the spark protection (

1) (see „Assemble/set spark pro-

tection).

2. Loosen the 3 xing screws (15)

and remove the grinding disc

cover (16).

3. Loosen the xing screws

( 11) and remove the grinding

belt cover ( 12) (see „Chang-

ing the grinding belt“).

4. Unscrew the grinding disc nut

(19a) in the clockwise direction,

by holding the nut of the opposite

roller of the grinding belt in place

(see small image). Hold it tight

with a 19mm socket wrench or

pliers.

5. Remove the clamping ange

(19b) and the grinding disc (19).

6. Set up the new grinding disc (19)

and the clamping ange and man-

ually screw the grinding disc nut

(19a) in the anti-clockwise direction.

7. Screw the grinding disc cover (16).

8. Set the spark protection ( 1)

and the workpiece support (

18) so that the distance between

the grinding disc (19) is max.

2mm (see „Assembly“).

The grinding disc nut must not be

screwed too tightly in order to avoid a

breaking of the grinding disc and nut.

9. Test run: Before starting work

and after each change of grind-

ing disk, carry out a test run of at

least 60 seconds with no load.

Switch off the equipment im-

mediately if the disk runs lumpy,

substantial vibrations occur, or

abnormal noises are generated.

Cleaning and

maintenance

Disconnect the plug before adjust-

ment, maintenance or repair.

Have any work not described

in these instructions carried

out by a specialist workshop.

Use only original components.

Allow the equipment to cool

before carrying out any main-

tenance and cleaning work.

There is a risk of burns.

Before each use, check the equipment

for obvious defects such as loose, worn

or damaged components and check that

screws or other parts are sitting correctly.

In particular, check the grinding

disk ( 19). Replace damaged parts.

Cleaning

Do not use cleaning agents or sol-

vents. Chemical substances may at-

tack plastic parts of the equipment.

Never clean the equipment under

running water.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 240 C2 - IAN 321203 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSBS 240 C2 - IAN 321203 Manual

Product: