773450
28
Zoom out
Zoom in
Previous page
1/124
Next page
28
GB IE
Grinding with the grinding
disc
Fold down the spark protec-
tor ( 1) when grinding in
order to avoid injury from
sparks.
The arrow on the protective hood
( 3) shows the direction of rota-
tion of the grinding disc.
Place the workpiece on the workpiece
support ( 18) and slowly bring it to
its desired angle on the grinding disc
(19).
Move the workpiece slightly from side
to side in order to achieve an optimal
grinding result. This way, the grinding
disc is worn uniformly. Occasionally,
allow the workpiece to cool down.
Tape loops
The arrow on the protective hood
( 9) shows the direction of rota-
tion of the grinding belt.
Firmly hold the workpiece, do not ex-
ert any strong force.
Move the workpiece slightly from side
to side in order to avoid a one-sided
wear of the grinding belt.
Always grind the pieces of wood in
the direction of the wood grain in or-
der to avoid chipping.
Change grinding belt
1. Loosen the 2 xing screws (11)
and hang out the grinding belt
cover (12).
2. Press the clamping lever (7)
downwards and detract the
grinding belt (10).
3. Place the new grinding belt (10)
in the centre on the upper (20a)
and lower (20b) rollers.
4. Push the clamping lever grinding
belt (7) and mount the grinding
belt cover (12).
Set the tape run:
5. The tape run accuracy is set by
turning the adjusting screw for
belt run (8).
6. Check the tape run by manually
turning the grinding belt.
Change grinding disc
Information on replace-
ment:
Never operate the device without
protective equipment.
Ensure that the rotation speed
stated on the grinding disc ( 19)
is the same or higher than the nomi-
nal rotation speed of the device.
Ensure that the grinding disc dimen-
sions match those of the device.
Only use awless grinding discs
(ringing test: when you strike the
grinding disc with a plastic ham-
mer, it results in a clear sound).
Never re-drill a locating hole
which is too small to make it
larger.
Never use separate bushings or
adapters in order to make grind-
ing discs whose hole is too large
t the device.
Do not use any saw blades.
To clamp the grinding tools only
use the clamping ange provided.
The pads between the clamping
ange and the grinding tools must
be made of elastic materials e.g.,
rubber, soft cardboard etc.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBS 240 C2 - IAN 321203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 240 C2 - IAN 321203 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info