12 GB/IE/NI
DANGER FROM ELECTROMAGNETIC FIELDS:
Cutting current generates electromagnetic fields.
Do not use if you have a medical implant.
Never wrap the cutting cable around your body.
Guide cutting cables together.
zWelding mask-specific safety instructions
With the help of a bright light source (e.g. lighter) examine the
proper functioning of the welding shield prior to starting with any
cutting work.
Cut spatters can damage the protective screen. Immediately
replace damaged or scratched protective screens.
Immediately replace damaged or highly contaminated or splat-
tered components.
The device must only be operated by people aged 16 or over.
Please familiarise yourself with the cutting safety instructions.
Tothat end, you must also observe the safety instructions of your
plasma cutter.
Always wear a welding helmet while welding and plasma cutting.
If it is not used, you could sustain severe lesions to the retina.
Always wear protective clothing during welding and plasma
cutting operations.
Never use the welding shield without the protective screen because
this could damage the optical unit. There is a risk of damage to the
eyes!
Regularly replace the protective screen to ensure good visibility
and fatigue-proof work.
zEnvironment with increased electrical hazard
Environments with increased electrical hazard may be encountered,
for example:
In workplaces where the space for movement is restricted, such
that the operator is working in a forced position (e.g. kneeling,
sitting, lying) and is touching electrically conductive parts;
In workplaces which are restricted completely or in part in terms
of electrical conductivity and where there is a high risk through
avoidable or accidental touching by the welder;
In wet, humid or hot workplaces where the air humidity or sweat
significantly reduces the resistance of human skin and the insulat-
ing properties or effect of protective equipment.
