796092

Parkside PPSK 40 A2 - IAN 383214 Manual

11
Zoom out
Zoom in
Previous page
1/89
Next page
GB/IE/NI 11
Do not use the plasma cutter when it is raining or snowing.
Wear dry insulating gloves.
Do not touch the electrodes with bare hands.
Do not wear wet or damaged gloves.
Protect yourself from electric shock with insulation against the
workpiece.
Do not open the device housing.
Additional protection against a shock from the mains power in
the event a fault can be provided by using a fault-circuit inter-
rupter, which is operated with a leakage current of no more than
30mA and covers all mains-powered devices in close proximity.
Thefault-circuit interrupter must be suitable for all types of current.
There must be means of rapid electrical isolation of the cutting
power source or the cutting circuit (e.g. emergency stop device)
which are easily accessible.
DANGER FROM SMOKE EMISSION WHEN PLASMA
CUTTING:
Inhalation of fumes which result from plasma cutting can endanger
health.
Do not keep your head in the fumes.
Use the device in open areas.
Only use the device in well-ventilated spaces.
DANGER FROM FLYING SPARKS WHEN PLASMA CUTTING:
Cutting sparks can cause an explosion or fire.
Keep flammable substances away from the cutting location.
Do not use the plasma cutter near flammable substances.
Cutting sparks can cause fires.
Keep a fire extinguisher close by and an observer should be
present to be able to use it immediately.
Do not carry out plasma cutting on drums or any other closed
containers.
DANGER FROM ARC BEAMS:
Arc beams can damage your eyes and injure your skin.
Wear a hat and safety goggles.
Wear hearing protection and high, closed shirt collars.
Use a welding safety helmet and make sure that the filter setting
iscorrect.
Wear complete body protection.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPSK 40 A2 - IAN 383214 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPSK 40 A2 - IAN 383214 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info