763020

Parkside PPS 40 B2 - IAN 327358 Manual

16
Zoom out
Zoom in
Previous page
1/49
Next page
16 GB/IE/NI
Cutting cables should be com-
pletely unwound and installed
parallel on the floor, if possible
Devices and systems at risk of
interference radiation must be
removed from the cutting area
if possible, or shielded.
• General plasma
explanations
Plasma cutters are operated
by pushing pressurised gas,
e.g. air, through a small pipe.
In the centre of the pipe, there is
a negatively charged electrode
that is directly above the noz-
zle. The vortex ring causes the
plasma to rotate quickly. If you
supply the negative electrode
with current and make the tip of
the nozzle touch the metal, this
connection creates a closed,
electrical circuit. A powerful
spark occurs between the
electrode and the metal. While
the gas flows into the pipe, the
spark heats up the gas until it has
reached the plasma condition.
This reaction causes a current
from the controlled plasma with
a temperature of 16,649 ºC
or more that moves at speed
of 6.096 m/sec and the metal
transforms into steam and molten
discharge. The plasma itself
conducts electrical current.
The working circuit that allows
the arc to occur remains as long
as current is supplied to the elec-
trode and the plasma remains
in contact with the metal to be
processed.
The cutting nozzle has a range
of further channels. These chan-
nels generate a constant flow of
protective gas around the cutting
area. The pressure of the gas
flow controls the radius of the
plasma jet.
PLEASE NOTE!
fThis machine is only designed to use
compressed air as “gas”.
• Before use
• Installation environment
Make sure that working area is sufficiently
ventilated. If the device is used without
sufficient cooling, the power-on time reduces
and it can result in overheating.
Additional protection can be required for
this purpose:
The device must be free-standing with a
distance of at least 0.5 m all around.
Ventilation slots must not be blocked or
covered.
The device must not be used a storage
place and tools or other items must not
be placed on the device.
Safety instructions / General plasma explanations / Before use
327358_Plasmaschneider_PPS_40_B2_content_LB6_IE_NI.indb 16 06.09.2019 12:41:02
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPS 40 B2 - IAN 327358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPS 40 B2 - IAN 327358 in the language / languages: English, German as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info