779757
33
Zoom out
Zoom in
Previous page
1/148
Next page
33
GB IE
Only insert the rechargeable
battery once the device is
completely assembled.
Risk of injury!
Checking the battery charge
level
The battery’s (1) charge level is indicated
by the charge state indicator.
The charge level of the battery is indi-
cated by illumination of the correspond-
ing LED lights (17) while the device is in
operation.
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs
to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
Charge the battery (1) when only
the red LED on the level indicator is
illuminated.
The charging time is around 1 hour.
1. Remove the battery (1) from the appli-
ance if necessary.
2. Plug the battery charger (23) into a
mains outlet.
3. Insert the battery (1) in the charging com-
partment of the battery charger (23).
4. Pull the battery (1) out of the battery
charger (23).
5. Unplug the battery charger (23) from
the mains.
1. Place the device with inserted cutter
onto the edge of the workpiece to be
processed while allowing space below
the cutter.
2. Unlock the cutting depth rough adjust-
ment by turning the locking knob (16)
anticlockwise about half way.
3.. Press the cutting depth rough adjust-
ment button (6) and keep it pressed.
4. Now move the drive unit (5) down-
wards/upwards and roughly set the
desired cutting depth.
5. Let go of the button (6).
6. Use the adjusting knob (7) for ne
adjustment: one entire rotation corres-
ponds to 1 mm:
Counter-clockwise rotation:
greater cutting depth.
Clockwise rotation:
lesser cutting depth.
7. Fix the desired cutting depth by turning
the locking knob (16) clockwise until
you sense resistance.
We recommend testing the cutting
depth adjustment by means of a test
cut on a reject piece.
To permanently secure the nely ad-
justed cutting depth, you can screw
in the locking screw (8) into the ad-
justing knob (7) of the cutting depth
ne adjustment from the underside
of the baseplate (9).
Inserting/removing the
battery
1. To remove the battery (1) from the ap-
pliance, press the release buttons (2) on
the battery and pull out the battery.
2. To insert the battery (1), push the bat-
tery along the guide rail into the device.
You will hear it click into place.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside POFA 12 A1 - IAN 308577 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside POFA 12 A1 - IAN 308577 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info