779757
35
Zoom out
Zoom in
Previous page
1/148
Next page
35
GB IE
6. Hold the device rmly with both
hands while working. While
doing so, ensure none of your
ngers protrude into the area
beneath the drive unit ( 5)
and mill with a consistent feed
motion.
8. Turn off the device.
After the device has been
switched off, the cutter conti-
nues moving for some time.
Do not touch the moving cut-
ter and do not put the device
down before the cutter has
come to a complete standstill.
Risk of injury!
Edge and prole cutting
a
When edge or prole cutting with-
out parallel stop, the cutter must be
equipped with a stop ring (a) as
guide.
1. Move the turned on machine to the
workpiece until it sits on the stop ring on
the workpiece edge to be processed.
2. Move the machine with both hands
along the workpiece edge. Avoid exces-
sive pressure.
Milling with parallel stop
You can mill notches and proles with the
parallel stop by moving the parallel stop
along the workpiece edge at a pre-set
distance.
Solid materials can only
be milled in small steps
(max. 1-2 mm cutting depth).
Deeper grooves must be
milled in several steps.
1. Insert the parallel stop (22) into
the receptor (14) provided on
the baseplate. Tighten the retai-
ning screws (15).
2. Place the battery-powered rou-
ter cutter onto the edge of the
workpiece while allowing space
below the cutter.
3. Set the cutting depth to 1-2 mm
and x in place.
4. Make sure that the parallel stop
(22) lies against the workpiece
edge correctly.
5. Begin to remove 1-2mm of
wood in small steps using the
battery-powered router cutter.
To do so, move the turned-on
device along the workpiece
edge with lateral pressure on the
parallel stop (22).
The parallel stop (22) acts as
the lateral guide for the battery-
powered router cutter.
Continuously check that the
groove has a right angle.
6. For deeper grooves, repeat work
steps 4-5 until you achieve the
desired result.
Cleaning/maintenance
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. In this way you avoid dam-
age to the appliance and possible
injury to people.
Remove the battery from the device
before all cleaning and mainte-
nance work and before transporting
it. If the device is switched on acci-
dentally, there is a danger of injury.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside POFA 12 A1 - IAN 308577 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside POFA 12 A1 - IAN 308577 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info