14 GB/IE/NI/CY/MT
DANGER FROM ARC BEAMS:
Arc beams can damage your eyes and injure your skin.
Wear a hat and safety goggles. Wear hearing protection and
high, closed shirt collars. Wear welding safety helmets and make
sure you use the appropriate filter settings. Wear complete body
protection.
DANGER FROM ELECTROMAGNETIC FIELDS:
Welding current generates electromagnetic fields. Do not use if you
have a medical implant. Never wrap the welding cable around
your body. Guide welding cables together.
zWelding mask-specific safety instructions
With the help of a bright light source (e.g. lighter) always check
the proper functioning of the welding mask prior to starting with
any welding work.
Weld spatters can damage the protective screen. Immediately
replace damaged or scratched protective screens.
Immediately replace damaged or highly contaminated or splat-
tered components.
The device must only be operated by people aged 16 or over.
Please familiarise yourself with the welding safety instructions.
Also refer to the safety instructions of your welder.
Always wear a welding mask while welding. If you do not do this,
you could sustain severe lesions to the retina.
Always wear protective clothing during welding operations.
Never use a welding mask without the welding lens. There is a risk
of damage to the eyes!
Regularly replace the protective screen to ensure good visibility
and fatigue-proof work.
zEnvironment with increased electrical hazard
When welding in environments with increased electrical hazard,
the following safety instructions must be observed.
Environments with increased electrical hazard may be encountered,
for example:
In workplaces where the space for movement is restricted, such
that the welder is working in a forced posture (e.g.: kneeling,
sitting, lying) and is touching electrically conductive parts;
In workplaces which are restricted completely or in part in terms
of electrical conductivity and where there is a high risk through
avoidable or accidental touching by the welder;