796098

Parkside PMPS 200 A1 - IAN 389215 Manual

16
Zoom out
Zoom in
Previous page
1/365
Next page
16 GB/IE/NI/CY/MT
zProtective clothing
At work, the welder must protect his/her whole body by using
appropriate clothing and face protection against radiations and
burns. The following steps must be observed:
–Wear protective clothing prior to welding work
–Wear gloves.
–Open windows or use fans to guarantee air supply.
–Wear safety goggles and face mask.
Gauntlet gloves made of a suitable material (leather) must be worn
on both hands. They must be in perfect condition.
A suitable apron must be worn to protect clothing from flying
sparks and burns. When specific work, e.g. overhead welding,
is required, a protective suit must be worn and, if necessary,
even head protection.
PROTECTION AGAINST RAYS AND BURNS
Warn of the danger to the eyes by hanging up a sign saying
“Caution! Do not look into flames!” in the work area. The work-
places must be shielded so that the persons in the vicinity are
protected. Unauthorised persons must be kept away from welding
work.
The walls in the immediate vicinity of fixed workplaces should
neither be bright coloured or shiny. Windows up to head height
must be protected to prevent rays from penetrating or reflecting
through them, e.g. by using suitable paint.
zEMC Device Classification
According to the standard IEC 60974-10, this is a welder in
electromagnetic compatibility Class A. Class A devices are devices
that are suitable for use in all other areas except living areas and
areas that are directly connected to a low-voltage supply mains that
(also) supplies residential buildings. Class A devices must adhere to
the Class A limit values.
WARNING NOTICE: Class A devices are intended for use in
an industrial environment. Due to the power-related as well as the
radiated interference variables, difficulties might arise in ensuring
electromagnetic compatibility in other environments.
Even if the device complies with the emission limit values in accord-
ance with the standard, such devices can still cause electromagnetic
interference in sensitive systems and devices. The user is responsible for
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMPS 200 A1 - IAN 389215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMPS 200 A1 - IAN 389215 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info