796098

Parkside PMPS 200 A1 - IAN 389215 Manual

13
Zoom out
Zoom in
Previous page
1/365
Next page
GB/IE/NI/CY/MT 13
–for storing gases, fuels, mineral oils or similar – even if they
have been
–empty for a long time – as possible residues may present a risk
of explosion.
Special regulations apply in rooms where there is a risk of fire or
explosion.
Welded joints that are subject to heavy stress loads and are
required to comply with certain safety requirements may only be
carried out by specially trained and certified welders. Examples of
this are pressure vessels, running rails, tow bars, etc.
ATTENTION! Always connect the earth terminal as close as
possible to the point of weld to provide the shortest possible path
for the welding current from the electrode to the earth terminal.
Never connect the earth terminal to the housing of the welder!
Never connect the earth terminal to earthed parts far away from
the workpiece, e.g. a water pipe in another corner of the room.
This could otherwise damage the protective bonding system of the
room you are welding.
Do not use the welder in the rain.
Do not use the welder in a moist environment.
Only place the welder on a level surface.
The output is rated at an ambient temperature of 20 °C.
The welding time may be reduced at higher temperatures.
RISK OF ELECTRIC SHOCK:
Electric shock from a welding electrode can be fatal. Do not weld
in rain or snow. Wear dry insulating gloves. Do not touch the
electrodes with bare hands. Do not wear wet or damaged gloves.
Protect yourself from electric shock with insulation against the
workpiece. Do not open the device housing.
DANGER FROM WELDING FUMES:
Inhalation of welding fumes can endanger health. Do not keep
your head in the fumes. Use the equipment in open areas.
Use extractors to remove the fumes.
DANGER FROM WELDING SPARKS:
Welding sparks can cause an explosion or fire. Keep flammable
substances away from the welding location. Do not weld near flam-
mable materials. Welding sparks can cause fires. Keep a fire extin-
guisher close by and an observer should be present to be able to use
it immediately. Do not weld on drums or any other closed containers.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMPS 200 A1 - IAN 389215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMPS 200 A1 - IAN 389215 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info