Manual Parkside PKS 1500 A1 - IAN 102787 (page 9 of 52) (English, German, Dutch, French)

595350

Zoom out

Zoom in

1/52

4 GB/IE

recommended.

– Tie long hair back in a hair net.

9 Use protective equipment

– Wear protective goggles.

– Wear a mask when carrying out dust-creating

work.

10 Connect the dust extraction device

– If connections for dust extraction and a collec-

ting device are present, make sure that they are

connected and used properly.

– Operation in enclosed areas is only permitted

with a suitable extraction system.

11 Do not use the cable for purposes for which it is

not intended

– Do not use the cable to pull the plug out of the

outlet. Protect the cable from heat, oil and sharp

edges.

12 Secure the workpiece

– Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held

more securely than with your hand.

– An additional support is necessary for long work-

pieces (table, trestle, etc.) in order to prevent the

machine from tipping over.

– Always press the workpiece rmly against the

working plate and stop in order to prevent boun-

cing and twisting of the workpiece.

13 Avoid abnormal posture

– Make sure that you have secure footing and

always maintain your balance.

– Avoid awkward hand positions in which a sudden

slip could cause one or both hands to come into

contact with the saw blade.

14 Take care of your tools

– Keep cutting tools sharp and clean in order to be

able to work better and more safely.

– Follow the instructions for lubrication and for tool

replacement.

– Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

– Check extension cables regularly and replace

them when damaged.

– Keep the handle dry, clean and free of oil and

grease.

15 Pull the plug out of the outlet

– Never remove loose splinters, chips or jammed

wood pieces from the running saw blade.

– During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

16 Do not leave a tool key inserted

– Before switching on, make sure that keys and

adjusting tools are removed.

17 Avoid inadvertent starting

– Make sure that the switch is switched off when

plugging the plug into an outlet.

18 Use extension cables for outdoors

– Only use approved and appropriately identied

extension cables for use outdoors.

– Only use cable reels in the unrolled state.

19 Remain attentive

– Pay attention to what you are doing. Remain

sensible when working. Do not use the electric

tool when you are distracted.

20 Check the electric tool for potential damage

– Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free

and function as intended prior to continued use

of the electric tool.

– Check whether the moving parts function

faultlessly and do not jam or whether parts are

damaged. All parts must be correctly mounted

and all conditions must be fullled to ensure

fault-free operation of the electric tool.

– The moving protective hood may not be xed in

the open position.

– Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speci-

ed in the operating manual.

– Damaged switches must be replaced at a custo-

mer service workshop.

– Do not use any faulty or damaged connection

cables.

– Do not use any electric tool on which the switch

cannot be switched on and off.

21 ATTENTION!

– Exercise elevated caution for double mitre cuts.

22 ATTENTION!

– The use of other insertion tools and other acces-

sories can entail a risk of injury.

23 Have your electric tool repaired by a qualied

electrician

– This electric tool conforms to the applicable

safety regulations. Repairs may only be perfor-

med by an electrician using original spare parts.

Otherwise accidents can occur.

Additional safety instructions

1 Safety precautions

– Warning! Do not use damaged or deformed saw

blades.

– Replace a worn table insert.

– Only use saw blades recommended by the ma-

nufacturer which conform to EN 847-1.

– Make sure that a suitable saw blade for the ma-

terial to be cut is selected.

– Wear suitable personal protective equipment.

This includes:

– Hearing protection to avoid the risk of beco-

ming hearing impaired,

– Respiratory protection to avoid the risk of

inhaling harmful dust,

– Wear gloves when handling saw blades and

rough materials. Carry saw blades in a contai-

ner whenever practical.

– Wear goggles. Sparks generated during work

or splinters, chippings and dust coming from

the device can lead to loss of eyesight.

– Connect a dust collecting device to the electric

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKS 1500 A1 - IAN 102787 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKS 1500 A1 - IAN 102787 Manual

Product: