Manual Parkside PKS 1500 A1 - IAN 102787 (page 7 of 52) (English, German, Dutch, French)

595350

Zoom out

Zoom in

1/52

2 GB/IE

Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

NOTE:

According to the applicable product liability laws, the ma-

nufacturer of the device does not assume liability for da-

mages to the product or damages caused by the product

that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating in-

structions, you have to meet the applicable regulations

that apply for the operation of the machine in your count-

ry. Keep the operating instructions package with the ma-

chine at all times and store it in a plastic cover to protect

it from dirt and moisture. Read the instruction manual

each time before operating the machine and carefully

follow its information. The machine can only be operated

by persons who were instructed concerning the operati-

on of the machine and who are informed about the asso-

ciated dangers. The minimum age requirement must be

complied with.

In addition to the safety notes contained in the present

operating instructions and the special regulations of your

country, the generally recognized technical rules for the

operation of machines must be observed.

Legend of Fig. 1

1 Start button

2 Handle

3 Locking lever

4 Motor

5 Saw blade

6 Moving saw blade guard

7 Base

8 Table insert

9 Rotary table

10 Workpiece clamp

11 Housing / base joint

12 Dust bag

13 Stationary saw blade guard

PKS 1500 A1

Scope of delivery

Mitre saw

Dust bag

Workpiece clamp

Tool for changing the saw blade –

6mm hex key

2 work piece supports

Support stand

2 batteries (AAA)

2 carbon brushes

Operating instructions

Technical Data

Dimensions L x W

x H mm

690 x 550 x 440

Rotary table ø mm

385 x 150

Table height mm

Saw blade Ø mm

210/30/2,6

Number of teeth

Speed rpm

5000

Cutting speed m/s

Pivot range

2 x 45°

Tilt angle

45°

Double mitre

45° x 45°

left

Catch positions

45°, 30°, 22,5°, 15°, 0°,

15°, 22,5°, 30°, 45°

Weight kg

7,7

Cross-cutting data

Max. cut depth

90°/45°

60 / 35 mm

90°/90°

120 x 60 mm

90°/45°

80 x 60 mm

45°/90°

120 x 35 mm

45°/45°

80 x 35 mm

Drive

Motor V/Hz

220-240~ / 50

Rated input W

S6 25% 1500W

Technical changes reserved!

*S6, continuous operation periodic duty.

Identical duty cycles with a period at load followed by a period at

no load. Running time 10 minutes; duty cycle is 25% of the running

time.

The work piece must have a minimum height of 3mm

and a minimum width of 10 mm.

Make sure that the workpiece is always secured with

the clamping device.

Information about noise development

The noise levels of this machine during operation are as

follows:

: 99.6dB(A) K=3dB(A)

: 112.6dB(A) K=3dB(A)

Vibration: 4.51m/s

K=1.5m/s

Warning: Noise can have serious effects on your health.

If the machine noise exceeds 85 dB (A), please wear

suitable hearing protection. If the electrical connection

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKS 1500 A1 - IAN 102787 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKS 1500 A1 - IAN 102787 Manual

Product: