Manual Parkside PKO 24 A1 - IAN 339151 (page 20 of 80) (English, German, Dutch, French, Polish)

786099

Zoom out

Zoom in

1/80

15GB/IE

Additional safety instructions

Safety instructions for working with compressed

air and blasting guns

• The compressor pump and lines can become very hot during

operation. Touching these parts will burn you.

• The air which is sucked in by the compressor must be kept

free of impurities that could cause ﬁres or explosions in the

compressor pump.

• When releasing the hose coupling, hold the hose coupling

piece with your hand. This way, you can protect yourself

against injury from the rebounding hose.

• Wear safety goggles when working with the blow-out pistol.

Foreign bodies or blown oﬀ parts can easily cause injuries.

• Do not blow at people with the blow-out pistol and do not

clean clothes while being worn. Risk of injury!

Safety information for paint spraying

• Do not process any paints or solvents with a ﬂash point be-

low 55° C. There is a risk of explosion!

• Do not heat up paints or solvents. There is a risk of explosion!

• If hazardous liquids are processed, wear protective ﬁlter

units (face guards). Also, adhere to the safety information

provided by the manufacturers of such liquids.

• The details and designations of the Ordinance on Hazard-

ous Substances, which are displayed on the outer packaging

of the processed material, must be observed.

• Additional protective measures are to be undertaken if neces-

sary, particularly the wearing of suitable clothing and masks.

• Do not smoke during the spraying process and/or in the

work area. There is a risk of explosion! Paint vapours are

easily combustible.

• Never set up or operate the equipment in the vicinity of a ﬁre

place, open lights or sparking machines.

• Do not store or eat food and drink in the work area. Paint

vapours are harmful to your health.

• The work area must exceed 30 m3 and suﬃcient ventilation

must be ensured during spraying and drying. Do not spray

against the wind. Always adhere to the regulations of the

local police authority when spraying combustible or hazard-

ous materials.

• Do not process media such as white spirit, butyl alcohol and

methylene chloride with the PVC pressure hose. These media

will destroy the pressure hose.

Operating pressure vessels

• You must keep your pressure vessel in good working order,

operate the vessel correctly, monitor the vessel, carry out

necessary maintenance and repair work immediately and

meet the relevant safety precautions.

• The supervisory authority may enforce essential control

measures in individual cases.

• A pressure vessel is not allowed to be used if it has faults or

deﬁciencies that can endanger workers or third parties.

• Check the pressure vessel for signs of rust and damage each

time before using. Do not use the compressor with a dam-

aged or rusty pressure vessel. If you discover any damage,

then please contact the customer service workshop.

Keep these safety instructions in a safe place.

Residual risk

Observe the speciﬁed maintenance and safety instructions in

the instruction manual.

Always be attentive at work and keep third persons at a safe

distance from your workplace.

Even with proper use of the device, a certain residual risk re-

mains, which can not be excluded. The following potential haz-

ards can be derived from the type and design of the device:

• Unintentional commissioning of the product.

• Hearing loss if no suitable hearing protection is worn.

• Wear safety glasses to prevent your eyes and face from dust

and dirt particles.

• Inhalation of whirled-up dust and dirt particles.

Warning!

This electric tool generates an electromagnetic ﬁeld during op-

eration. This ﬁeld can impair active or passive medical implants

under certain conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that persons with medical

implants consult with their physician and the manufacturer of

the medical implant prior to operating the electric tool.

7. Technical data

Mains connection 230 V∼ 50 Hz

Motor rating 1800 W

Operating mode S1

Compressor speed 2850 min-1

Pressure vessel capacity approx. 24 l

Operating pressure approx. 10 bar

Theoretical intake capacity approx. 260 (l/min)

Sound power level LPA 72.9 dB(A)

Sound power level LWA 92.9 dB(A)

Uncertainty KPA/WA 2.59 dB

Protection type IP20

Weight of the unit approx. 27 kg

Oil (15W 40) approx. 0.25 l

Max. altitude

(above mean sea level) 1000 m

The noise emission values were measured in accordance with

EN ISO 3744:1995.

Wear hearing protection.

The eﬀects of noise can cause a loss of hearing.

8. Before starting the equipment

• Open the packaging and remove the device carefully.

• Remove the packaging material as well as the packaging

and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport damage.

• If possible, store the packaging until the warranty period has

expired.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKO 24 A1 - IAN 339151 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKO 24 A1 - IAN 339151 Manual

Product: