679031
5
Zoom out
Zoom in
Previous page
1/14
Next page
Introduction / Safety
L Replaceable parts
You can replace the following parts yourself.
When you do this always observe the relevant ope-
rating instructions and safety advice.
- Sawdust collection bag (a)
- Laminate cutting attachment
{
- Stop plate
q
- Saw blade
Have any other maintenance and repair tasks car-
ried out by our service centre or an accredited elec-
trical equipment repair centre.
L
Technical information
Nominal output: 1450 W
Nominal voltage: 230 V ~ 50 Hz
Nominal speed: n
0
1800 - 4500 min
-1
Circumferential speed: 24 m / s – 55 m / s
Weight: 14.5 kg
Protection class: II /
&
Sound pressure level: Lp = 95.5 dB (A)
Sound power level: Lw = 108.5 dB (A)
Vibration: 2.5 m / s
2
Saw blade for wood
(supplied installed): 250 x 30 x 1.8 mm,
36 HM - teeth (3.0 mm)
Universal saw blade: 250 x 30 x 2.35 mm,
80 HM - teeth (3.2 mm)
Cutting capacity:
Cutting width: max. 140 mm (without
laminate cutting attachment)
max. 200 mm (with laminate
cutting attachment)
Cutting depth: max. 65 mm
L Safety
Safety advice relating
specifically to this saw
J Ensure that the device is always used in accord-
ance with the advice in these operating instruc-
tions and only by persons over 18 years of age.
J
Keep children away from the device.
Store the device indoors in an enclosed,
dry place where it cannot be reached
by children.
J In addition, you must also read the advice in the
accompanying booklet containing safety advice
before using the device for the first time.
J Check that all moving parts on the tool are working
properly, can move freely and are not damaged.
All parts must be correctly attached and fulfil all
the requirements necessary to allow the electrical
tool to operate properly.
J Carry out the following before each use:
- check the saw for damaged parts or safety
equipment and if necessary have them
replaced by an electrician.
- check the saw blade for quality / condition,
sharpness, cleanliness and free movement.
- check that the saw blade is properly attached
and does not wobble. Attach the saw blade
by placing the locking spanner (e) on the ou-
ter flange
u
and tightening the screw (for
attaching the saw blade)
y
counter-clock-
wise.
To avoid danger to life
from electric shock:
J
Do not operate the device if the
mains lead or mains plug is damaged.
Caution! A damaged mains lead
presents a serious danger to life from electric
shock. The service centre for your country is
shown in the guarantee documentation.
J Have repairs carried out only by an electrician or
the relevant service centre.
7 GB/IE
5


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pkgs-1450-laser---kh-3175

Reset search

  • Hallo, mijn naam is Bram Hexspoor en ben op zoek naar een tandwiel met schroef voor het bevestigen van het zaagblad.Bj. 2003
    Hij zit bevestigd aan de motor
    Het is een PARKSIDE TYP. PKGS 1450 afkortzaag met slive. Submitted on 12-12-2021 at 04:58

    Reply Report abuse
  • CAN I REPLACE THE LASER ON MY CHOP AND MITRE SAW IF SO WERE DO I GET ONE THANKS Submitted on 30-12-2020 at 14:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGS 1450 Laser - KH 3175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGS 1450 Laser - KH 3175 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PKGS 1450 Laser - KH 3175

Parkside PKGS 1450 Laser - KH 3175 User Manual - German - 14 pages

Parkside PKGS 1450 Laser - KH 3175 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info