Manual Parkside PHSL 900 A1 - IAN 315259 (page 31 of 136) (English, German, Dutch, French, Polish)

733455

Zoom out

Zoom in

1/136

IEGB

Sliding the carrying eye

You can slide the carrying eye (20) to bet-

ter spread the weight of the device.

You may need to slide the soft grip

(27) by turning and sliding to achie-

ve this.

1. Loosen both screws (28) with an Allen

key (4 mm).

2. Gently retighten the screws (28).

3. Place on the shoulder strap and attach

the device to the shoulder strap. (See

“Attaching the shoulder strap”)

4. Slide the carrying eye (20) until the

weight of the device is spread evenly.

5. Put the device down and tighten the

screws (28).

Removing the knife guard

Press the knife guard (

21) on the locati-

on marked „Parkside“ and remove it.

Switching On and Off

Ensure that you are standing in a

rm position with both hands grip-

ping the hedge trimmer away from

the body. Ensure that the trimmer

is in contact with no other objects

before switching on.

1. Make a loop in the end of the extensi-

on cable and suspend this in the cable

strain relief (18)

2. Connect the device to the mains voltage.

3. To switch on, hold the safety switch

(15) depressed and simultaneously

press the on/off switch (16). The hedge

trimmer will be run at maximum speed.

You can release the safety switch (15)

again.

4. The equipment will switch off again

when you release on/off switch (16).

Working with the Electric

Hedge Trimmer

During cutting work, ensure that no

contact is made with objects, e.g.

such as wire fencing or main plant

stems. This may result in damage to

the cutter bar.

• To avoid eye injuries, always wear the

supplied safety goggles while working

with the hedge trimmer (

22).

• Always hold the equipment rmly in

both hands, with one hand on the rear

handle and the other on the front han-

dle (

13). Thumbs and ngers must

be rmly around the handles.

• Check the shoulder strap (

19) on a

pleasant position, which makes it easier

for you to hold the hedge trimmer.

• Switch off the equipment immedi-

ately in the event that the blades are

blocked by solid objects, pull out the

power plug then remove the object.

• Always work away from the mains

power outlet. Set the cutting direction

before starting work. Ensure that the

power cable is kept well away from

the working area. Never lay the cable

over the hedge, where it could easily

be caught up in the trimmer blades.

• Avoid overstraining the equipment dur-

ing work.

Pull out the power plug im-

mediately if the cable is

damaged, badly twisted

or has been completely cut

through.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHSL 900 A1 - IAN 315259 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHSL 900 A1 - IAN 315259 Manual

Product: