733455

Parkside PHSL 900 A1 - IAN 315259 Manual

29
Zoom out
Zoom in
Previous page
1/136
Next page
29
IEGB
f) wear suitable clothing! Do not wear
loose clothing or jewellery that can
become jammed in the moving parts.
It is recommended that you wear solid
gloves, non-slip shoes and protective
goggles.
g) Wear ear and eye protection.
h) Release the on-off button to shut down
the device in an emergency.
Operation
a) Switch the appliance off and remove
the mains plug, before:
- cleaning or removing a blockage;
- inspection, servicing or work on the
hedge trimmer;
- adjusting the working position of the
cutting unit;
- leaving the hedge trimmer unattended.
b) Always ensure that the hedge trimmer
is properly placed in one of the indica-
ted working positions before the motor
is started.
c) While operating the hedge trimmer,
always ensure that you have a secure
footing, particularly if steps or a lad-
der is being used.
d) Do not use the hedge trimmer with a de-
fective or strongly worn-out cutting unit.
e) To avoid the risk of re, ensure that the
motor is free from deposits and leaves.
f) Always ensure that all handles and
safety devices are mounted when you
use the hedge trimmer. Never try to
use an incomplete hedge trimmer or a
hedge trimmer with impermissible mo-
dications.
g) Always use both hands when the
hedge trimmer is equipped with two
handles.
h) Always familiarise with your surroun-
dings and pay attention to potential
dangers that you cannot hear because
of the noise the hedge trimmer makes.
Maintenance and storage
a) If the hedge trimmer is taken out of ope-
ration for purposes of maintenance, in-
spection or storage, turn off the motor,
pull the mains plug and make sure that
all rotating parts have come to a stand-
still, and let the machine cool down
before you check or adjust it, etc.
b) Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trim-
mer always t the cutting device cover.
Proper handling of the hedge trimmer
will reduce possible personal injury
from the cutter blades.
Assembling
instructions
Pull out the power plug before carry-
ing out any work on the equipment.
Use only original parts.
The long-shaft hedge trimmer can
be used optionally with or without
the middle tubular shaft (
9).
1. Unpack the device and check it for
completeness.
Assembly of the middle tubu-
lar shaft (9) (optional):
2. Remove the cap (23) from the middle
tubular shaft (9).
Loosen the star wheel (11).
Slide the middle tubular shaft (9) onto
the tubular shaft on the appliance hous-
ing (12) in a slight rotating movement.
When doing so, the retaining knob
(10) locks into place. Fix the two tubu-
lar elements in place with the rotary
knob (11).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHSL 900 A1 - IAN 315259 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHSL 900 A1 - IAN 315259 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info