Manual Parkside PHSL 900 A1 - IAN 315259 (page 32 of 136) (English, German, Dutch, French, Polish)

733455

Zoom out

Zoom in

1/136

Putting down the device

• Place the device on the ground with

the motor housing  rst.

• The safety cutter bar (

1) must be

placed on the ground without being

subjected to any pressure.

• Do not apply any static pressure what-

soever to the cutter bar (

1).

Swivelling the Arm

Caution!

The gear box (

2) becomes

hot during operation. There is

a risk of burns. Do not touch

the gearbox housing (

2) or

the connecting point to the

front tubular shaft (

6).

1. Release the indexing by pushing the

safety slide (14) forward.

2. The tubular shank can now optionally

be turned 45° / 90° to the right or the

left (see the scale on the device).

Cutting Techniques

• Cut thick branches beforehand using a

branch clippers.

• The double-sided cutter bar enables

cutting in both directions or, with a

swinging action, from one side to the

other.

• In case of vertical cutting, move the

hedge trimmer uniformly forward or up

and down in an arc movement.

• In case of horizontal cutting, move

the hedge trimmer in a sickle-shaped

movement to the edge of the hedge, so

that cut branches fall to the ground.

• In order to achieve long straight lines,

the placing of tensioned guiding cords

is recommended.

Cutting Shaped Hedges:

It is recommended that hedges be cut in

a trapezoidal shape, in order to prevent

stripping off of the lower branches. This cor-

responds to the natural plant growth and

allows the hedge to thrive optimally. During

cutting, only the new annual growths are

reduced and thus a dense branching and a

good screen will develop.

1. Cut the sides of a hedge  rst. To do

this, move the hedge trimmer in the

direction of growth from bottom to top.

If you cut down from the top, the thin-

ner branches will move out, which may

result in some areas having sparse

growth or holes.

2. Cut the top edge, according to taste, in a

 at shape, roof shape or rounded shape

3. Trim young plants to the required

shape. The main growth should re-

main undamaged until the hedge has

reached the planned height. All other

shoots are lopped off to half size.

Care of Free-Growing Hedges:

Free-growing hedges are not shaped

when cut, although they must be regularly

maintained so the hedge does not become

too high.

Working Safely

Please also observe the illustrations

on page 4 on how to use the hedge

trimmer.

• Do not use the high pruning saw when

standing on a ladder or in an unsafe

position.

• Do not be tempted to make unconsid-

ered cuts. Doing so may endanger

both yourself and others.

• Children must be supervised to ensure

that they do not play with the equipment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHSL 900 A1 - IAN 315259 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHSL 900 A1 - IAN 315259 Manual

Product: