Manual Parkside PHS 450 A1 - IAN 436117 (page 30 of 186) (English, German, Dutch, Danish, French, Italian, Polish, Spanish)

819956

Zoom out

Zoom in

1/186

Switching on

CAUTION! Personal injury or dam-

age to the device! Hold the device tightly

with both hands and away from your

body.

1. (Fig.A) Form a loop from the end

of the extension cord, pass the loop

through the opening on the handle (7)

and hook the loop into the strain relief

(9) on the handle (7).

2. Connect the device to the power sup-

ply.

3. Remove the blade encasing (10).

4. Always hold the device with both

hands: One hand on the handle (7)

and the other hand on the front handle

(4).

5. NOTICE! Before switching the machine

on, make sure that it is not touching

any objects.

Press and hold the safety switch (5) on

the front handle (4) while pressing the

On/Off switch (6) on the handle (7).

The hedge trimmer runs at top speed.

Switching off

1. Release one of the two switches.

2. Wait until the power tool has stopped

before placing it down.

3. Pull the device plug out of the wall

socket if you are leaving the device un-

attended or if you have finished work-

ing.

Transport

Notes

• Switch off the device and disconnect

the plug from the power outlet. Make

sure that all moving parts have come to

a complete stop.

• Always transport the hedge trimmer

with the blade encasing (10).

• Always carry the device by the handle

(7).

Cleaning, maintenance

and storage

WARNING! Electric shock! Risk of in-

jury due to unintentional start-up. Protect

yourself when performing maintenance or

cleaning work. Switch off the device and

disconnect the mains plug from the socket.

You should have any repair and mainten-

ance work that is not described in these

instructions carried out by our Service

Centre. Only use original replacement

parts.

Cleaning

WARNING! Electric shock! Never

spray down the device with water.

NOTICE! Risk of damage. Chemical sub-

stances may attack the plastic parts of the

machine. Do not use any cleaning agents

or solvents.

• Keep the ventilation slits, motor housing

and handles of the machine clean. Use

a damp cloth or brush to do this.

Cleaning and maintaining the

safety cutter bar

Tools and aids required

• Cloth

• Care oil spray

Care after each use

• Remove any green cuttings that are

stuck.

• Clean the safety cutter bar (2) with an

oily cloth.

• Maintain the safety cutter bar (2) with

a care oil spray.

Maintenance

• Check the device before each use for

obvious defects such as loose, worn or

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHS 450 A1 - IAN 436117 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHS 450 A1 - IAN 436117 Manual

Product: