Manual Parkside PHD 170 B2 - IAN 346400 (page 26 of 110) (English, German, Dutch, French, Polish)

762951

Zoom out

Zoom in

1/110

GB IE

• The rotating washing brush (21) is ba-

sically used without pressure exertion.

The cleaning function results from the

rotary movement and the water ow.

The wash brush does not rotate if the

water ow is missing.

In the event of leaks in the

water system, switch off the

equipment immediately at the

on/off switch (8) and discon-

nect the equipment from the

mains at the mains power

cord. Risk of electric shock!

Start afresh with making the

water connections (cf. “Start-

up / Operation” from point 2.).

If there is still air in the device,

please proceed as follows:

To vent the supply hose:

1. Remove the quick connector for gar-

den hose adapter (22) on the water

connection coupling (12) and turn the

water tap on until the water comes out

without bubbles.

2. Switch off the water tap.

3. Connect the supply hose to the water

connection (12) on the equipment us-

ing the quick connector for garden

hose adapter (22).

4. Fully open the water tap.

To vent the equipment:

5. Switch on the on/off switch (8) until

pressure has built up.

6. Switch off the on/off switch (8).

7. Press the on lever (19) on the gun (14)

until the pressure has gone.

8. Please repeat process 5. to 7. a few

times until there is no more air in the

device.

• You can lock or unlock the start le-

ver (19) of the spray gun (14) by

pressing the locking button (20).

Lock the starting lever to prevent

the pressure cleaner from being

inadvertently / accidentally started.

Interrupting operation

• Release the lever (19) of the gun (14).

• During prolonged work intervals turn

off the pressure cleaner by its ON /

OFF switch (8).

If the equipment falls over,

switch off the equipment

immediately at the on/off

switch (8) and disconnect the

equipment from the mains at

the mains power cord. Risk

of electric shock! Only now

should the equipment be re-

turned to an upright position.

For your own safety, wait

approx. 5 minutes before re-

connecting to the electricity.

Ending operation

1. After having worked with a detergent

rinse the pressure cleaner with clear

water.

2. Release the lever of the gun (14).

3. Turn off the pressure by its ON / OFF

switch (8). Disconnect the mains plug.

4. Turn off the water tap.

5. Disconnect the pressure cleaner from

the water mains.

6. Pull the lever (19) of the gun (14) to

vent the pressure existing within the

system.

Using detergents

The pressure cleaner was designed for

operation with a neutral detergent based

on a biologically decomposable anionic

tenside. Other detergents or chemical sub-

stances could impair the safety of the pres-

sure cleaner and damage it. Such damage

Parkside 170 Phd b2 ait 1= 3 adet Yag keçesi 2= 3 Adet Su Contasi 3= 3 Adet Sibop ihtiyacim var. Acil temin etmem gerek. Submitted on 11-3-2022 at 12:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 170 B2 - IAN 346400 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 170 B2 - IAN 346400

Parkside PHD 170 B2 - IAN 346400 User Manual - German - 22 pages

Parkside PHD 170 B2 - IAN 346400 User Manual - Dutch - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 170 B2 - IAN 346400 Manual

Product: