Manual Parkside PHD 170 B2 - IAN 346400 (page 25 of 110) (English, German, Dutch, French, Polish)

762951

Zoom out

Zoom in

1/110

coupling (12) and the water connec-

tion (13) on the device.

5. Connect to the spray gun (14) by insert-

ing and screwing in the jet pipe (3).

6. If the jet pipe (3) is mounted, connect

either the standard Vario nozzle (25)

or the turbo dirt miller (26) by inserting

into the jet pipe (3). The attachments

snap into place. To remove the attach-

ments, press the side lock (7) on the

front end of the jet pipe (3) and pull the

attachment forwards to disconnect it.

7. Connect the rotating washing brush

(21) directly to the spray gun (14) by

inserting it and tightening (bayonet t-

ting). It is always used without applying

any pressure. The cleaning function is

produced by the rotational movement

and the ow of water. If there is no

water ow, the washing brush does not

rotate.

If you turn the tip of the standard

Vario nozzle (25) to the left you will

increase the width of the jet. If you

turn the nozzle tip to the right you

will reduce the width of the jet.

The roles of the unit, use the handle

(2) only in conjunction with the

wheels (11). For lifting and carrying

use the carrying handle (2).

Mains connection

The pressure cleaner you have acquired

is already tted with a mains plug. The

equipment is designed for connection to an

earthed wall socket with a RCD (Residual

Current Device) at 230V~50Hz.

Only operate the pressure cleaner

after all the above points have been

observed.

1. Ensure that the pressure cleaner is

turned off by its ON / OFF switch (8).

2. Insert the mains plug into the mains

socket

Operation

Be prepared for the recoil

force of the emitted wa-

ter jet! Ensure that you are

standing rmly and that you

are holding the gun (14) se-

curely, otherwise you could

injure yourself or other

people.

Never operate the pressure cleaner

with a closed water tap. Dry run-

ning will damage the pressure

cleaner!

1. Turn on the water tap entirely.

2. Switch on the pressure cleaner with the

ON / OFF switch (8).

Only ever switch on the pressure clean-

er once you have connected all of the

water pipes and they do not leak.

The motor switches on until the re-

quired pressure has built up. After

the pressure has built up, the motor

switches off.

3. Press the gun (14) starting lever (19).

The nozzle operates by pressure and

the motor switches back on.

Releasing the starting lever (19) causes

the equipment to switch off. The system

remains pressurised.

• The turbo dirt miller (26) with its rota-

ting water jet is particularly suitable for

working with low water consumption.

• The standard Vario nozzle (25) with its

at jet is particularly suitable for surfa-

ce cleaning.

If you turn the nozzle tip to the left you

will increase the pressure. If you turn

the nozzle tip to the right you will re-

duce the pressure.

Parkside 170 Phd b2 ait 1= 3 adet Yag keçesi 2= 3 Adet Su Contasi 3= 3 Adet Sibop ihtiyacim var. Acil temin etmem gerek. Submitted on 11-3-2022 at 12:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 170 B2 - IAN 346400 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 170 B2 - IAN 346400

Parkside PHD 170 B2 - IAN 346400 User Manual - German - 22 pages

Parkside PHD 170 B2 - IAN 346400 User Manual - Dutch - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 170 B2 - IAN 346400 Manual

Product: