Manual Parkside PHD 170 B2 - IAN 346400 (page 24 of 110) (English, German, Dutch, French, Polish)

762951

Zoom out

Zoom in

1/110

GB IE

• The device must only be con-

nected to a mains socket via

a RCD (Residual Current De-

vice) with a rated leakage cur-

rent of not more than 30mA.

Fuse: at least 13ampere.

• Before each use, check the

equipment, cable and plug

for damage.

• If the power cable for this

equipment is damaged, it

must be replaced by the

manufacturer, a customer ser-

vice agent of the same or a

similarly qualied person in

order to prevent hazards.

• Do not pull the plug from the

socket by the cable. Protect

the cable from heat, oil and

sharp edges.

• Do not carry or x the equip-

ment by the cable.

• Unsuitable extension cables

can be dangerous. If an ex-

tension cable is used it must

be suitable for outdoor use,

and be routed above the

ground. We recommend us-

ing a cable drum that holds

the socket at least 60mm

above the ground.

Check the cable for damage.

• Before any work on the

equipment, during work

breaks and in the case of

non-use, remove the plug

from the socket.

• The cross-section of the pow-

er supply cable must not be

less than 2x2,5mm².

• Wear sturdy footwear to pro-

tect against electric shock.

• To protect against electric

shock, operate the equipment

only in an upright position.

• Always shut off the power

switch when leaving the ma-

chine unattended.

Start-up

In keeping with current regulations a

pressure cleaner must never be oper-

ated off the drinking water mains

supply without a controllable back-

ow preventer. A suitable backow

preventer in conformity with

EN 12729 type BA must be used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available in spe-

cialist shops.

A system separator (check valve) prevents

the backow of water and detergent into

the drinking water pipeline.

• Use a commercially available 1/2”

garden hose, at least 5m long, for wa-

ter supply.

Do not exceed a length of 30m.

• Use the device on a domestic water

connection with an output of at least

450l/h.

Setting up

1. Pull the curved handle (2) up as far as

it will go.

2. Connect the high-pressure tting (jet

gun) (29) to the jet gun (14). Ensure

that the hose runs to the front, so as not

to impede the handle (2).

3. Connect the feed hose to the water

supply and allow water to escape from

the other end of the feed hose with no

bubbles, in order to expel the air from

the feed hose. Switch off the water tap.

4. Connect the feed hose with the help of

the quick connector for garden hose

adapter (22) with the water connection

Parkside 170 Phd b2 ait 1= 3 adet Yag keçesi 2= 3 Adet Su Contasi 3= 3 Adet Sibop ihtiyacim var. Acil temin etmem gerek. Submitted on 11-3-2022 at 12:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 170 B2 - IAN 346400 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 170 B2 - IAN 346400

Parkside PHD 170 B2 - IAN 346400 User Manual - German - 22 pages

Parkside PHD 170 B2 - IAN 346400 User Manual - Dutch - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 170 B2 - IAN 346400 Manual

Product: