684857

Parkside PFDS 33 A1 - IAN 280331 Manual

30
Zoom out
Zoom in
Previous page
1/119
Next page
PFDS 33 A1
■ 26 
│
 GB
│
IE
♦ Push the flux-core wire through the wire feed guide C (see fig. 9).
Fig 9
♦ Guide the wire along the feed roll G and then push it into the cable
assembly opening I (see fig. 10).
Fig. 10
♦ Swivel the press roller unit E in the direction of the feed roll G
(See fig. 11).
♦ Hook the adjustment screw D into place (see fig. 11).
♦ Set the adjustment screw so that the welding wire sits firmly between
the press roller and the feed roll G in the upper guide without being
pinched (see fig. 11).
Fig. 11
♦ Switch on the welder using the main switch
.
♦ Press the torch button
.
Now the wire feed system pushes the welding wire through the cable
assembly
and the torch .
♦ As soon as the wire juts 1–2 cm out of the torch neck M, release the
torch button
(see fig. 12).
Fig. 12
♦ Switch off the welder.
♦ Screw the flow nozzle back on.
Make sure that the flow nozzle
matches the diameter of the
welding wire being used (see fig. 13).
With the supplied welding wire (Ø 0.9 mm) the flow nozzle
must be used with the next largest diameter of 1.0 mm .
Fig. 13
♦ Push the torch nozzle
back onto the torch neck M with a turn to the
right (see fig. 14).
Fig. 14
WARNING!
► To avoid the danger of electric shock, injury or damage:
–
Before maintenance or pre-work preparation activity,
always disconnect the mains plug from the mains
power socket.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PFDS 33 A1 - IAN 280331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PFDS 33 A1 - IAN 280331 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info