684857

Parkside PFDS 33 A1 - IAN 280331 Manual

29
Zoom out
Zoom in
Previous page
1/119
Next page
GB
│
IE 
│
 25 ■
PFDS 33 A1
♦ Unpack the wire roll completely so that it can be unrolled unimpeded.
Do not release the wire end yet (see fig. 3).
♦ Place the wire roll onto the shaft. Make sure that the roll unwinds on
the same side as the wire feed guide C (see fig. 3).
♦ Put the roll mount A back on and lock it by pressing and turning it
clockwise 90° (see fig. 3).
Fig. 3
♦ Undo the adjustment screw D and swing it upwards (see fig. 4).
Fig. 4
♦ Push the press roller unit E to the side (see fig. 5).
Fig. 5
♦ Undo the feed roll holder F by turning it anticlockwise and pulling it
upwards and off (see fig. 6).
♦ Check the upper side of the feed roll G to see if it is the correct wire
size. If required, the feed roll must be turned over or exchanged. The
supplied welding wire (Ø 0.9 mm) must be used in the feed roll G
with the next biggest specified wire thicknesses of Ø 1.0 mm.
The wire must be positioned in the upper groove!
♦ Replace the feed roll holder F and screw it tight.
Fig. 6
♦ Remove the torch nozzle
by turning it to the right (see fig. 7).
♦ Unscrew the flow nozzle
(see fig. 7).
♦ Route the cable assembly
away from the welder as straight as
possible (laying on the floor).
Fig. 7
♦ Pull the wire end from the edge of the spool (see fig. 8).
♦ Trim the wire end with a wire cutter or a diagonal cutter to remove any
damaged/bent wire (see see fig. 8).
NOTE
♦ THE WIRE MUST BE HOLD ON TENSION ALL THE TIME, TO AVOID
A RELEASING AND ROLL OUT! We recommend that you always
carry out work with the help of a second person.
Fig. 8
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PFDS 33 A1 - IAN 280331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PFDS 33 A1 - IAN 280331 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info