684857

Parkside PFDS 33 A1 - IAN 280331 Manual

28
Zoom out
Zoom in
Previous page
1/119
Next page
PFDS 33 A1
■ 24 
│
 GB
│
IE
Unpacking and checking the package
contents
1.) Remove all components from the packaging and check whether the
flux-core welder or the individual components show any signs of
damage. If this is the case, do not use the flux-core welder. Contact the
manufacturer via the service address provided on the warranty card.
2.) Remove all protective films and other transport packaging.
3.) Check that the delivery is complete.
Assembly
Fitting the welding mask
♦ Fold the side parts of the mask inwards.
Press the integrated clips into the corresponding holes so that they click
into each other (see fig. D).
♦ Lay the dark welding lens
into the mask with the writing at the
top (see fig. E).
The writing on the dark welding lens
must now be visible from the
front side of the welding mask.
♦ Push the handle
from the inside into the corresponding recess on
mask, until it clicks into place (see fig. F).
Filling with flux-cored wire
WARNING!
► To avoid the danger of electric shock, injury or damage:
–
Before maintenance or pre-work preparation activity,
always disconnect the mains plug from the mains
power socket.
NOTE
►
Depending on the application, different types of flux-core wires will
be required. This appliance can use wires with a diameter from
0.7–1.0 mm.
► The feed roller, torch nozzle and wire diameter must always match.
► The appliance is designed for wire rolls of up to a maximum of 450 kg.
♦ Open the cover of the wire feed unit
by turning the catch (see
arrow marking) to the position UNLOCK (see fig. 1).
Fig. 1
♦ Unlock the roller unit by turning the roller mount A 90° anticlockwise
(see fig. 2).
♦ Pull the roller unit from the shaft (see fig. 2).
Fig. 2
NOTE
► Make sure that the end of the wire does not come loose and cause
the roll to roll out on its own. The end of the wire may not be
released until during assembly.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PFDS 33 A1 - IAN 280331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PFDS 33 A1 - IAN 280331 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info