Manual Parkside PDRS - IAN 43095 (page 35 of 39) (English, German, Dutch)

595412

Zoom out

Zoom in

1/39

35 GB

General safety rules

All integral features or accessories for the collec-

tion, extraction or suppression of airborne dust

or fumes should be correctly used and main-

tained in accordance with the manufacturer’s

instructions.

Use respiratory protection in accordance with

employer’s instructions and as required by oc-

cupational health and safety regulations.

Noise hazards

Exposure to high noise levels can cause perma-

nent, disabling hearing loss and other problems,

such as tinnitus (ringing, buzzing, whistling or

humming in the ears). Therefore a risk assessment

and implementation of appropriate controls for

these hazards are essential.

Appropriate controls to reduce the risk may in-

clude actions such as damping materials to pre-

vent workpieces from “ringing”.

Use hearing protection in accordance with em-

ployer’s instructions and as required by occupa-

tional health and safety regulations.

Operate and maintain the assembly power tool

for threaded fasteners as recommended in the

instructions handbook, to prevent an unnecessa

increase in noise levels.

If the assembly power tool for threaded fasteners

has a silencer, always ensure it is in place and

in good working order when the assembly power

tool for threaded fasteners is operating.

Select, maintain and replace the consumable /

inserted tool as recommended in the instructions

handbook, to prevent an unnecessary increase

in noise.

Vibration hazards

Exposure to vibration can cause disabling dam-

age to the nerves and blood supply of the hands

and arms.

eep the hands away from the nutrunner socket

Wear warm clothing when working in cold con-

ditions and keep your hands warm and dry.

If you experience numbness, tingling, pain or

whitening of the skin in your ﬁngers or hands,

stop using the assembly power tool for threaded

fasteners, tell your employer and consult a phy-

sician.

Operate and maintain the assembly power tool

for threaded fasteners as recommended in the

instructions handbook, to prevent an unneces-

sary increase in vibration levels.

Do not use worn or ill-ﬁtting sockets or extensions,

as this is likely to cause a substantial increase

in vibration.

Select, maintain and replace the consumable /

inserted tool as recommended in the instructions

handbook, to prevent an unnecessary increase

in vibration levels.

Sleeve ﬁttings should be used where practicable.

Support the weight of the tool in a stand, ten-

sioner or balancer, if possible.

Hold the tool with a light but safe grip, taking

account of the required hand reaction forces,

because the risk from vibration is generally

greater when the grip force is higher.

Additional safety instructions

for pneumatic power tools

Air under pressure can cause severe injury:

– always shut oﬀ air supply, drain hose of air

pressure and disconnect tool from air supply

when not in use, before changing accessories

or when making repairs;

– never direct air at yourself or anyone else.

Whipping hoses can cause severe injury. Always

check for damaged or loose hoses and ﬁttings.

Cold air shall be directed away from the hands.

Do not use quick-disconnect couplings at tool

inlet for impact and air-hydraulic impulse

wrenches. Use hardened steel (or material with

comparable shock resistance) threaded hose

ﬁttings.

Whenever universal twist couplings (claw cou-

plings) are used, lock pins shall be installed

and whipcheck safety cables shall be used to

safeguard against possible hose-to-tool and

hose-and-hose connection failure.

43095_par_Druckluft-Ratschenschrauber PDRS_content_DE_NL.indd 35 28.05.14 11:27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDRS - IAN 43095 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDRS - IAN 43095 Manual

Product: