Manual Parkside PDRS - IAN 43095 (page 36 of 39) (English, German, Dutch)

595412

Zoom out

Zoom in

1/39

36 GB

Information about … / Environmental instructions and disposal information

… / Start-up / After initial use / Maintenance / Cleaning … / Information about …

Do not exceed the maximum air pressure stated

on the tool.

For torque-control and continuous-rotation tools,

the air pressure has a safety critical eﬀect on

performance. Therefore, requirements for length

and diameter of the hose shall be speciﬁed.

Never carry an air tool by the hose.

Start-up (see Fig. B / C)

Screw the included plug nipples

into the air

connection after ﬁrst wrapping the thread with

2–3 layers of sealing tape (not included).

Attach the required plug-in attachment to the

square intake.

Set the correct direction of rotation on the pivot

bolt

R = counterclockwise / remove screw,

F = clockwise / tighten screw.

Attach the plug-in attachment to the screw head.

Activate the trigger

Note: the connection to the compressed air source

is established through a ﬂexible air hose with quick

connector.

The ratcheting screwdriver will perform best when

used with an LW 10 mm air hose.

After initial use

Once the task has been ﬁnished the equipment must

be disconnect from the compressed air supply

Maintenance

Following the maintenance information speciﬁed here

will ensure a long service life for the product and

trouble-free operation. Your ratchet screwdriver work-

ing properly for a long time requires daily lubrication.

You may choose from the following options:

With an oil-fog lubricator

A complete maintenance unit includes an oil-fog

lubricator and is attached to the compressor.

Manually

Add 3–5 drops of speciality tool oil to the compr

essed

air connection before every use. If the compressed

air tool is not being used for several days, add 5–10

drops of oil to the compressed air connection be-

fore switching it on.

Always store your compressed air tools in dry

rooms.

Cleaning and Care

Never clean with liquids such as petrol, solvents

or water.

Do not allow liquids to enter the tool.

Only clean the tool with a dry cloth.

Information about warranty

and service processing

Creative Marketing Consulting GmbH

warranty

Dear customer,

the warranty for this device is 3 years from the date

of purchase. In the event of product defects, you

have legal rights against the retailer of this product.

Your statutory rights are not limited in any way by

our warranty detailed below.

Warranty terms

The warranty period begins on the date of purchase.

Please retain the original receipt safely. This docu-

ment is required as your proof of purchase.

Should this device show any fault in materials or ma-

nufacture within three years from date of purchase,

it will be repaired or replaced – at our choice – by

us free of charge. This warranty is conditional on the

defective device and the proof of purchase (receipt)

being presented within the three year warranty pe-

riod, and that there is a brief written description of

the nature of the defect and of the date it arose.

If the defect is covered by our warranty, we will re-

turn the repaired device or replacement thereof. A

43095_par_Druckluft-Ratschenschrauber PDRS_content_DE_NL.indd 36 28.05.14 11:27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDRS - IAN 43095 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDRS - IAN 43095 Manual

Product: