Manual Parkside PDRS - IAN 43095 (page 33 of 39) (English, German, Dutch)

595412

Zoom out

Zoom in

1/39

33 GB

General safety rules

Do not use the compressed air unit if it is not

air tight or in need of repair.

Never connect the compressed air unit to an air

hose with pressure exceeding 6.3 bar.

Keep your working area clean and well lit. Untidy

or poorly lit working areas can result in accidents.

Doing so will allow you better control of the

device, particularly under unforeseen circum-

stances.

Only have the device re-

paired by qualiﬁed specialist personnel using

OEM spare parts. This will maintain the safety

of the device.

Keep children and other persons away from

the device during use. Distractions can cause

you to lose control of the device.

Wear suitable clothing. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing and

gloves clear of moving parts. Loose clothing,

jewellery or long hair can become trapped in

moving parts.

Put down trigger and device in the event of un-

expected compressor failure.

If possible, use a condensate trap or regularly

drain the hoses and pipes of condensate (water)

before and whilst using compressed air units.

ATTENTION! An undersized com-

pressed air system may minimise the

eﬃciency of your device.

For multiple hazards, read and understand the

safety instructions before installing, operating,

repairing, maintaining, changing accessories on,

or working near the assembly power tool for

threaded fasteners. Failure to do so can result

in serious bodily injury.

Only qualiﬁed and trained operators should in-

stall, adjust or use the assembly power tool for

threaded fasteners.

Do not modify this assembly power tool for

threaded fasteners. Modiﬁcations can reduce

the eﬀectiveness of safety measures and in

crease

the risks to the operator.

Do not discard the safety instructions; give them

to the operator.

Do not use the assembly power tool for threaded

fasteners if it has been damaged.

Tools shall be inspected periodically to verify

that the ratings and markings required by this

part of ISO 11148 are legibly marked on the

tool. The employer / user shall contact the man-

ufacturer to obtain replacement marking labels

when necessary.

Projectile hazards

Failure of the workpiece, of accessories or even

of the inserted tool itself can generate high-ve-

locity projectiles.

Always wear impact-resistant eye protection

during the operation of the assembly power tool

for threaded fasteners. The grade of protection

required should be assessed for each use.

Ensure that the workpiece is securely ﬁxed.

Entanglement hazards

Entanglement hazards can result in choking,

scalping and / or lacerations if loose clothing,

personal jewellery, neckware, hair or gloves are

not kept away from the tool and accessories.

Gloves can become entangled with the rotating

drive, causing severed or broken ﬁngers.

Rotating drive sockets and drive extensions can

easily entangle rubber-coated or metal-reinforced

gloves.

Do not wear loose-ﬁtting gloves or gloves with

cut or frayed ﬁngers.

Never hold the drive, socket or drive extension.

Keep hands away from rotating drives.

Operating hazards

The use of the tool can expose the operator’s

hands to hazards including crushing, impacts,

cuts and abrasions and heat. Wear suitable

gloves to protect hands.

Operators and maintenance personnel shall be

physically able to handle the bulk, weight and

power of the tool.

Hold the tool correctly; be ready to counteract

normal or sudden movements and have both

hands available.

43095_par_Druckluft-Ratschenschrauber PDRS_content_DE_NL.indd 33 28.05.14 11:27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDRS - IAN 43095 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDRS - IAN 43095 Manual

Product: