Manual Parkside PDRS - IAN 43095 (page 31 of 39) (English, German, Dutch)

595412

Zoom out

Zoom in

1/39

31 GB

Introduction

Introduction / General safety rules

Technical Data

Max. torque: 61 Nm

Operating pressure: 6.3 bar

Speed: 150 rpm

Weight: 1120 g

Noise and vibration

Noise ratings were determined according to

EN 15744. Vibration ratings were determined

according to ISO 28927-2.

Vibration

(per EN 28927-2): 2.63 m / s

Uncertainty K: 1.5 m / s

Noise level L

: 91.9 dB(A)

Uncertainty K

: 3 dB

Sound power level L

: 102.9 dB(A)

Uncertainty K

: 3 dB

pC, peak

= 105.3 dB(A)

Uncertainty K = 3 dB

Scope of delivery

1 Air ratchet set

1 Plug nipple with gasket

7 Socket key (10, 11, 13, 14, 15, 17, 19 mm)

1 Extension

3 Bits (PH 2.3, SL 5.5)

1 U-joint

1 Bit holder

1 Oil reservoir

1 Carrying case

1 Instructions for use

General safety rules

Note: When used in the following text, the terms

„compressed air unit“ or „device“ refer to the com-

pressed air unit speciﬁed in these instructions for use.

Basic safety measures must be

followed when using compressed air units to eliminate

the risk of ﬁre, electric shock and personal injury.

Be sure to read and follow the notices within these

operating instructions prior to using the equipment

and store them in a safe location.

The manufacturer assumes no liability for damages

or personal injury resulting from failure to follow these

operating instructions.

Persons (including children) who lack the knowl-

edge or experience to use the tool or whose

physical, sensory or intellectual capacities are

limited must never be allowed to use the tool

without supervision or instruction by a person

responsible for their safety.

Ensure children do not play with the device.

RISK OF INJURY! Before

performing maintenance tasks, disconnect the

compressed air supply.

EXPLOSION HAZARD! Never

use petrol or other ﬂammable liquids

to clean the air tool! Sparks could

ignite residual vapours inside the compressed

air unit resulting in the compressed air unit ex-

ploding. Do not use the device in explosive en-

vironments with ﬂammable liquids, gasses or dust.

Never work on materials which are or could

potentially be highly ﬂammable or explosive.

Only use the equipment in areas of application

for which it was designed!

Do not overburden the device.

Never use hydrogen, oxygen, carbon

dioxide or other bottled gasses to

power this tool as doing so may re-

sult in an explosion and thus may cause severe

injuries.

Regularly maintain and clean the device as

speciﬁed (see chapters „Maintenance“ and

„Cleaning and care“).

Inspect the device for any damage before use.

Always make sure that the device is in perfect

condition each time before use.

Always be attentive! Unexpected movement of

the device may cause hazards.

Avoid placing your body in an unnatural position.

Keep proper footing and balance at all times.

By doing this you will be in a better position to

control the compressed air unit in unforeseen

circumstances.

43095_par_Druckluft-Ratschenschrauber PDRS_content_DE_NL.indd 31 28.05.14 11:27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDRS - IAN 43095 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDRS - IAN 43095 Manual

Product: