786093

Parkside PBM 42 A1 - IAN 373349 Manual

37
Zoom out
Zoom in
Previous page
1/200
Next page
37
GB IE
3. Pump out the engine oil with an oil
pump (not included in delivery).
4. Top up the engine oil (see “Filling the
engine oil”).
Replacing blades
Improper installation can
cause severe injury.
Never tilt the lawnmower to
the side or forwards when
the petrol or oil tank is fi lled!
This could damage the en-
gine, voiding the warranty.
Check the blade for wear and damage. If
dull or damaged, replace the blade!
Always have a specialist workshop
sharpen a dull blade, as they can
perform imbalance testing.
Wear gloves when handling the
blade.
Once you have loosened the blade
screw (33), you have to replace the
clamping disk (35).
The tightening torque of the blade
is 45 Nm.
1. Disconnect the spark plug connector
(11).
2. Put the device in the maintenance posi-
tion (see Figure ).
3. Use fi rm gloves and keep hold of the
blade (32). Use a spanner to turn the
blade bolt (33) counter-clockwise from
the motor spindle (34).
4. Reassemble the new blade in the re-
verse order.
Make sure that the blade is positioned
correctly and resting fl ush on the en-
gine spindle.
The clamping disk (35) must be posi-
tioned between the blade screw and
blade.
5. Tighten the blade with 45 Nm.
Adjusting the carburettor
The carburettor has been preconfi gured
for ideal performance at the factory. If any
readjustments are necessary (see “Trouble-
shooting”), have the adjustments made by
a specialist workshop.
Storage
General storage instructions
Never store the device with
the grass collection box full.
If the weather is too hot, the
grass will begin to ferment
under heat. Possible fi re haz-
ard.
• Clean and maintain the device prior to
storage.
• Give the engine time to cool off before
you store the device in an enclosed
space.
• Use suitable, permissible containers for
storing the fuel.
• Store the device in a dry and dustproof
location and out of reach of children.
• Do not enclose the device in nylon
sacks as this may cause moisture or
mould to form.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBM 42 A1 - IAN 373349 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBM 42 A1 - IAN 373349 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info